Guide Bar Maintenance; Chain Sprocket; Model And Serial Numbers - sunjoe SWJ599E Operator's Manual

Guide Bar Maintenance

When the guide bar shows signs of wear, turn it over on the
saw to distribute the wear for maximum bar life. Feathering or
burring of the bar rails is a normal process of bar wear. You
should smooth such faults with a file as soon as they occur.
Replace a bar with any of the following faults:
• wear inside the bar rails permitting the chain to lay over
sideways;
• bent guide bar;
• cracked or broken rails;
• spread rails.
Turn the saw over, check the underside of the guide bar, and
make sure that the lubrication holes and chain groove are free
from impurities.
You can purchase replacement parts for your Sun Joe
SWJ599E electric chain saw online at snowjoe.com or, to
order by phone, contact Snow Joe
service at 1-866-SNOWJOE (1-866-766-9563).

Chain Sprocket

Regularly check the condition of the sprocket and replace it
when wear exceeds 0.5 mm (Fig. 23).
Do not mount a new chain with a worn sprocket or vice-versa.
Fig. 23
Storage
After every work session, clean the machine thoroughly to
remove all dust and debris and slide the bar sheath over the
cutting bar. Repair or replace any faulty parts on the unit.
Store the machine in a dry, locked place out of the reach
of children.
®
+ Sun Joe customer
® ®
< 0,5 mm
Support
If your Sun Joe SWJ599E electric chain saw requires service
®
or maintenance, please call 1-866-SNOWJOE (1-866-766-
9563) for assistance.

Model and Serial Numbers

When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
S W J 5 9 9 E
18
Serial #: