sunjoe SWJ803E Operator's Manual

sunjoe SWJ803E Operator's Manual

Electric pole chain saw
Hide thumbs Also See for SWJ803E:
Table of Contents

Advertisement

Available languages

Available languages

OPERATOR'S MANUAL
A Division of Snow Joe
, LLC
®
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
m
DANGER!
This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
m
WARNING!
This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
m
CAUTION!
This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
General Safety
m
WARNING!
When using electric yard tools, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock, and personal injury, including the following:
1. Keep guards in place – Protective guards should be
checked periodically to ensure they are properly fitted and
in correct working order.
2. Remove adjusting keys and wrenches – Check that
adjusting wrenches are removed from the saw before
turning it on.
3. Keep work area clean and well-lit – Clear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
4. Do not use in dangerous environments – Do not use
power tools in damp or wet locations.
5. Do not use the pole chain saw in the rain.
6. Keep bystanders and children away – All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
7. Do not force the tool – It will do the job effectively and
safely if it is used at the rate for which it was designed.
8. Use the right tool – Do not force the tool or any
attachment on the tool to do a job for which they were
not designed.
9. Wear proper apparel – Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Use of heavy-duty rubber gloves,
© 2021 by Snow Joe
, LLC
®
All rights reserved. Original instructions.
R
ELECTRIC POLE CHAIN SAW
10-INCH | 8-AMP
Model SWJ803E
substantial non-skid footwear, and close-fitting clothing is
recommended when working outdoors with power tools.
10. Wear protective hair coverings to contain long hair.
11. Always wear safety glasses and ear defenders to
provide eye and ear protection – Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
12. Wear face or dust masks – If the cutting operation is
dusty, the use of a face or dust mask specially designed
to filter out microscopic particles is recommended.
13. Do not overreach – Keep proper footing and balance
at all times.
14. Maintain tools with care – Keep tools sharp and clean
for best and safest performance. Follow instructions for
lubricating and changing accessories.
15. Disconnect tool – Disconnect the pole chain saw from
the power supply when not in use, before servicing,
when transporting, or when changing the chain or other
accessories.
16. Reduce the risk of unintentional starting – Make sure
the switch is in the OFF position before plugging the tool
into a power source.
17. Use recommended accessories – Consult the owner's
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
18. Check for damaged parts – Before each use, repair, or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts, and any other conditions that
may affect the tool's operation.
19. Never leave tool unattended while it is running – Turn
the power OFF by removing the power cord directly from
its socket. Do not leave the saw until the cutting bar
comes to a complete stop.
20. Avoid unintentional starting – Do not carry the pole
chain saw with your finger on the switch.
21. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw – Be sure to
encase the cutting bar in its protective sheath when not
in use.
22. Stay alert – Watch what you are doing. Use common
sense. Do not operate the pole chain saw when you
are tired.
23. Store idle tool indoors – When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
1
Form No. SJ-SWJ803E-880E-MR8
SAVE THESE INSTRUCTIONS
EN

Advertisement

Table of Contents
loading

Summary of Contents for sunjoe SWJ803E

  • Page 1 OPERATOR’S MANUAL Model SWJ803E A Division of Snow Joe , LLC ® Form No. SJ-SWJ803E-880E-MR8 IMPORTANT! substantial non-skid footwear, and close-fitting clothing is recommended when working outdoors with power tools. Safety Instructions 10. Wear protective hair coverings to contain long hair.
  • Page 2: Electrical Safety

    Electrical Safety 4. To prevent the appliance cord from disconnecting from the extension cord during operation, make a knot with the two cords as shown in Table 1. 1. Ground fault circuit interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for Table 1.
  • Page 3 • Use extreme caution when cutting a limb that is under • Kickback safety devices on this pole chain saw include tension. When wood tension is released, the limb could a skip chain and a low kickback guide bar. These will spring back and strike the operator, causing severe injury reduce, but not entirely prevent, kickbacks.
  • Page 4: Safety Symbols

    Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, Keep bystanders and children and follow all instructions in the a safe distance away.
  • Page 5: Technical Data

    Know Your Electric Pole Chain Saw Read the owner’s manual and safety instructions carefully before operating the pole chain saw. Compare the illustration below to the pole chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
  • Page 6: Carton Contents

    Unpacking Installing/Replacing the Guide Bar and Chain Carton Contents Tools and supplies required: • Electric pole chain saw • Dual-tipped hex key wrench/blade screwdriver (supplied) • 10 in. (25.4 cm) chain • Heavy-duty work gloves • 10 in. (25.4 cm) guide bar NOTE: When replacing the guide bar and chain, use only •...
  • Page 7 6. Starting at the tip, mount the chain drive links into the bar groove, leaving a loop at the back of the bar. The Fig. 4 chain will loosely fit until it is placed on the sprocket (Figs. 7 & 8). NOTE: Make certain of the direction of the chain .If the chain is mounted backwards, the saw will vibrate abnormally and will not...
  • Page 8: Operation

    8. Adjust the chain tension as needed by adjusting the chain tensioner screw with the supplied flat-tip blade Fig. 12 screwdriver. Make sure to align the chain tensioner screw with the pin hole (Fig. 10). Fig. 10 Chain tensioner Chain tensioner screw 11.
  • Page 9 Remember 50-foot extension cord with lighted end (Model that a careless fraction of a second is sufficient to inflict PJEXT50-B). Visit sunjoe.com to order online or call serious injury. 1-866-SNOWJOE (1-866-766-9563) to order by phone.
  • Page 10 4. To turn the tool ON, push and hold the safety lock button 4. Lock the pole in position by closing the cam-lock (Fig. 19), (located on the rear handle) with your thumb and then and ensure that the pole is secure. If the pole telescopes squeeze the trigger with your fingers.
  • Page 11: Cutting Tips

    to the ground increases, the difficulty of making the first Fig. 21 cut (from the underside of limb) increases. Fig. 24 Multi-angle head adjustment dial 60º MAXIMUM 3. Adjust the head to the desired position (Fig. 22). Basic Cutting Procedure Fig.
  • Page 12: Maintenance

    the guide bar can be driven rapidly back toward the operator. Load Either of these reactions can cause loss of saw control, which can result in serious injury. Do not rely exclusively upon the Second Cut safety devices built into the saw. As a pole chain saw user, you should take several steps to keep your cutting jobs free from accident or injury.
  • Page 13: Motor Cooling

    Chain Sharpening WARNING! Always unplug the power cord before performing any adjustments, maintenance, or repairs to your WARNING! To ensure that the chain saw works safely pole chain saw. and efficiently, it is essential that the cutting components are • Use protective gloves when handling the bar and chain. well-sharpened.
  • Page 14: Troubleshooting Tips

    You can purchase replacement parts for your Sun Joe ® SWJ803E electric pole chain saw by ordering online at Bar and • sunjoe.com or, to order by phone, contact Snow Joe The chain tension is too tight; re-tension.
  • Page 15: Model And Serial Numbers

    Support to each work session. If your Sun Joe SWJ803E electric pole chain saw requires ® WARNING! Do not plug in the power cord until you service or maintenance, please call 1-866-SNOWJOE have completed all of the daily checks.
  • Page 16 NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®...
  • Page 17 SNOW JOE + SUN JOE CUSTOMER PROMISE ® ® ABOVE ALL ELSE, Snow Joe, LLC (“Snow Joe”) is dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a Snow Joe , Sun Joe , or Aqua Joe product (“Product”) does not work or breaks under...
  • Page 21: Seguridad General

    Modelo SWJ803E Una división de Snow Joe , LLC ® Forma No. SJ-SWJ803E-880S-MR8 ¡IMPORTANTE! 7. No fuerce la herramienta: hará el trabajo de una forma eficiente y segura si se usa a la velocidad para la cual Instrucciones de seguridad fue diseñada.
  • Page 22: Seguridad Eléctrica

    19. Nunca deje la herramienta sin atender mientras está tomacorriente de pared apropiado. No modifique el funcionando: APÁGUELA desenchufando el cable de enchufe del artefacto, ni el receptáculo del cable de extensión ni el enchufe del cable de extensión en alimentación, directamente de su enchufe.
  • Page 23 Reglas de seguridad • Mantenga todas las partes del cuerpo alejadas de cadena de corte. específicas para motosierras • No retire material cortado, ni sujete el material a ser cortado, cuando las cuchillas estén moviéndose. de altura Asegúrese de que el interruptor esté apagado al retirar material atascado.
  • Page 24 contragolpes. Siga las precauciones necesarias indicadas en este manual del operador para evitar los contragolpes. • Use siempre ambas manos al operar la motosierra de altura, una mano sujetando el gatillo y la otra mano sujetando el tubo. Sujétela firmemente. Los pulgares y los dedos deben rodear el gatillo y el tubo.
  • Page 25: Símbolos De Seguridad

    Símbolos de seguridad La siguiente tabla muestra y describe los símbolos de seguridad que pueden aparecer en este producto. Lea, comprenda y siga todas las instrucciones relacionadas a la unidad antes de intentar ensamblarla y operarla. Símbolo Descripción Símbolo Descripción LEA EL(LOS) MANUAL(ES) DEL OPERADOR: lea, comprenda y Mantenga a los transeúntes y niños...
  • Page 26: Datos Técnicos

    Conozca su motosierra eléctrica de altura Lea detenidamente este manual del operador y las instrucciones de seguridad antes de operar su motosierra eléctrica de altura. Compare la ilustración debajo con su motosierra de altura para familiarizarse con la ubicación de los diversos controles y ajustes. Conserve este manual para futuras referencias.
  • Page 27: Contenido Del Paquete

    Desembalaje ¡ADVERTENCIA! Antes de llevar a cabo cualquier tarea de mantenimiento, asegúrese de que la herramienta esté Contenido del paquete desenchufada de la fuente de alimentación. No seguir esta advertencia podría resultar en lesiones severas. • Motosierra eléctrica de altura Instalación y reemplazo de la barra-guía •...
  • Page 28 Fig. 3 Fig. 6 Tuerca de cubierta de extremo Borde de corte afilado Eslabón de impulso de cadena Rotación de cadena Llave hexagonal Fig. 4 6. Empezando en la punta, monte los eslabones de impulso de la cadena en la ranura de la barra, dejando un bucle en la parte posterior de la barra.
  • Page 29 10. Retire todo el exceso de la cadena girando el tornillo tensionador de la cadena en sentido horario hasta que Fig. 9 la cadena encaje perfectamente con los eslabones de Piñón Pernos de barra impulso en la ranura de la barra (Fig. 12). NOTA: una cadena está...
  • Page 30: Operación

    Operación ¡PRECAUCIÓN! La cadena continuará girando por varios segundos luego de haber apagado la herramienta. Puesta en marcha y parada No utilice la motosierra de altura bajo condiciones húmedas. Tenga extremo cuidado al cortar arbustos pequeños, brinzales ¡PRECAUCIÓN! o ramas bajo tensión ya que el material tenso y angosto puede •...
  • Page 31 ® ® NOTA: empuje los tubos uno hacia el otro para reducir iluminado (Modelo PJEXT50-B). Visite sunjoe.com para la longitud total, o jálelos hacia fuera para extender pedirlo en línea o llame al 1-866-SNOWJOE la longitud total del poste. Solo extienda el poste a la (1-866-766-9563) para pedirlo por teléfono.
  • Page 32: Consejos De Corte

    Ajuste del perno Fig. 22 El perno de sujeción puede necesitar ser ajustado para asegurar al tubo telescópico en su lugar. 1. Desenganche el seguro de leva. Usando la llave hexagonal, apriete la tuerca del seguro de leva, luego cierre el seguro de leva. Compruebe que el tubo esté asegurado.
  • Page 33 Carga Fig. 24 Segundo corte Primer corte: 1/3 de diámetro Corte final 60º MÁXIMO Fig. 25 Procedimiento básico de corte • Ahora, haga su corte final, suave y prolijamente, desde Esta unidad está diseñada para cortar ramas y tallos pequeños la parte superior de la rama, contra la rama principal, de de hasta 9.5 plg (24.1 cm) de diámetro, dependiendo del tipo manera que la corteza crezca y selle la “herida”.
  • Page 34: Mantenimiento

    barra-guía, la barra-guía puede ser empujada rápidamente • Solo use partes de repuesto originales Snow Joe ® Sun Joe . Las partes que no son de la misma calidad hacia el operador. Cualquiera de estas reacciones puede ® pueden dañar severamente el equipo, comprometer la causar una pérdida de control de la motosierra, causando seguridad e invalidar la garantía.
  • Page 35: Afilado De La Cadena

    Usted puede adquirir partes de repuesto para su motosierra (Fig. 27). eléctrica de altura SWJ803E de Sun Joe ordenando en línea ® en sunjoe.com o por teléfono llamando a la central de servicio...
  • Page 36: Consejos Para La Solución De Problemas

    Tabla de solución de problemas al cliente Snow Joe + Sun Joe al 1-866-SNOWJOE ® ® (1-866-766-9563). Problema Acción correctiva Piñón de cadena • Compruebe que el cable de extensión esté Compruebe regularmente la condición del piñón y reemplácelo instalado correctamente en el receptáculo de cuando el desgaste exceda los 0.5 mm (Fig.
  • Page 37: Modelo Y Número De Serie

    Soporte Si su motosierra eléctrica de altura SWJ803E de Sun Joe ® requiere servicio o mantenimiento, llame al 1-866-SNOWJOE (1-866-766-9563) para asistencia.
  • Page 38 NOTA: los accesorios están sujetos a cambios sin obligación alguna por parte de Snow Joe + Sun Joe de notificar sobre dichos ® ® cambios. Los accesorios pueden ser pedidos en línea en sunjoe.com o vía telefónica llamando al centro de servicio al cliente Snow Joe + Sun Joe al 1-866-SNOWJOE (1-866-766-9563). ®...
  • Page 39 LA PROMESA DE SNOW JOE + SUN JOE AL CLIENTE ® ® POR SOBRE TODO, en Snow Joe, LLC (“Snow Joe”) estamos dedicados a usted, nuestro cliente. Nos esforzamos por hacer que su experiencia sea lo más placentera posible. Desafortunadamente, hay veces en que un producto Snow Joe , Sun Joe ®...
  • Page 41: Sécurité Générale

    MANUEL D'UTILISATION Modèle SWJ803E Une division de Snow Joe , LLC ® Formulaire n° SWJ803E-880F-MR8 IMPORTANT! 6. Maintenir les spectateurs et les enfants à bonne distance – Tous les spectateurs, notamment les enfants Consignes de sécurité et les animaux familiers, doivent être maintenus à une distance de sécurité...
  • Page 42: Sécurité Électrique

    18. Vérifier que les pièces ne sont pas endommagées procurez-vous une rallonge à fiche polarisée. Une rallonge – Avant chaque utilisation, réparez ou remplacez tout à fiche polarisée nécessite l’utilisation d’une prise murale polarisée. La fiche polarisée de la rallonge ne s’insère dispositif de protection ou toute pièce endommagés.
  • Page 43 5. N'utilisez pas le cordon à mauvais escient. Ne jamais tirer Transportez la scie à chaîne à manche télescopique d'un la scie à chaîne à manche télescopique par le cordon et endroit à un autre après l'avoir débranchée. Pendant ne pas tirer brusquement sur le cordon pour le retirer de la son transport, tenez le manche au niveau de son point d'équilibre (près de l'extrémité...
  • Page 44 peut se produire une brusque réaction inverse faisant rebondir manche sèche, propre et exempte d'huile et de graisse. le guide-chaîne vers le haut et vers l'arrière en direction de • Tenez toujours la scie à chaîne à manche télescopique l'utilisateur. Le pincement de la chaîne de la scie le long de la des deux mains quand vous l'utilisez.
  • Page 45: Symboles De Sécurité

    Symboles de sécurité Le tableau suivant décrit et explique les symboles de sécurité pouvant être marqués sur cet outil. Lisez, comprenez et suivez toutes les instructions sur l’outil avant d’essayer de procéder à son assemblage et de l’utiliser. Symboles Descriptions Symboles Descriptions LIRE LE OU LES MANUELS...
  • Page 46: Données Techniques

    Apprenez à mieux connaître votre scie à chaîne électrique à manche télescopique Lisez attentivement le manuel de l'utilisateur et les consignes de sécurité avant d'utiliser la scie à chaîne à manche télescopique. Comparez l'illustration ci-dessous avec la scie à chaîne à manche télescopique pour vous familiariser avec l'emplacement des différents réglages et commandes.
  • Page 47 Déballage AVERTISSEMENT! Avant d’effectuer le moindre entretien, s’assurer que l’outil est débranché. Toute personne Contenu de la caisse ne tenant pas compte de cet avertissement s’expose à de graves blessures. • Scie à chaîne électrique à manche télescopique Pose/remplacement du •...
  • Page 48 Écrou de coiffe Fig. 3 Fig. 6 arrière Denture d'attaque tranchante Maillon d'entraînement de chaîne Rotation de chaîne Clé Allen Fig. 4 6. En commençant par l’extrémité, montez les maillons d’entraînement de la chaîne dans la rainure du guide- chaîne en formant une boucle à l'arrière du guide-chaîne. La chaîne s'ajustera en restant lâche jusqu'à...
  • Page 49 7. Maintenez la chaîne en position sur le guide-chaîne et enroulez la boucle autour du pignon. Placez le guide- Fig. 11 chaîne pour qu'il repose bien contre la surface de fixation, Languette arrière pour que les goujons du guide-chaîne soient dans la longue fente du guide-chaîne et pour que la goupille de réglage soit dans le trou de la goupille de tension de chaîne (Fig.
  • Page 50: Démarrage Et Arrêt

    • Démarrer, arrêter et redémarrer le moteur électrique à répétition et à quelques secondes d'intervalle peut Fig. 13 dégager énormément de chaleur et endommager le moteur. Pour protéger la durée de vie de votre scie à Capuchon d'écrou de chaîne télescopique électrique, attendez toujours au coiffe arrière moins cinq secondes pour redémarrer la scie après l'avoir arrêtée.
  • Page 51 SJTW-A dont les extrémités s'éclairent quand ® elle est sous tension (modèle PJEXT50-B). Veuillez vous Fig. 18 rendre sur le site sunjoe.com pour commander en ligne ou appelez le 1-866-SNOWJOE (1-866-766-9563) pour commander par téléphone. 3. Faites une boucle avec le cordon d’alimentation, poussez- la à...
  • Page 52 4. Verrouillez le manche à la longueur voulue en fermant la Fig. 21 came de serrage (Fig. 19) et assurez-vous que le manche est bien attaché. Si le manche se rallonge ou se raccourcit quand la came de serrage est fermée, l'écrou doit être resserré.
  • Page 53 Conseils pour le sciage Élagage L'élagage consiste à tailler les branches d'un arbre vivant. Posture appropriée pour le sciage • Retirez les branches longues en plusieurs étapes. • Répartissez votre poids sur les deux pieds, debout sur un • Coupez d'abord les branches inférieures pour faire de la sol stable.
  • Page 54: Entretien

    Si la scie se pince ou se bloque • Sciez toujours quand la chaîne tourne à pleine vitesse. Pressez à fond la gâchette marche/arrêt et maintenez la 1. Attendez que la chaîne s'arrête, patientez cinq minutes chaîne à une vitesse constante. pour que la scie se refroidisse, débranchez le cordon •...
  • Page 55 Tension de chaîne Il est toutefois possible d'affuter la chaîne existante si l'affutage est effectué soigneusement. Tout travail sur la chaîne Quand la chaîne est froide, vérifiez sa tension avant d'utiliser et le guide-chaîne nécessite de l'expérience et des outils la scie.
  • Page 56: Entretien Du Guide-Chaîne

    électrique à manche télescopique Sun Joe SWJ803E ® Guide- réglez la tension. chaîne et en passant votre commande en ligne sur le site sunjoe.com, • Le réservoir d'huile de la chaîne est vide; chaîne ou par téléphone en appelant le service clientèle Snow Joe ®...
  • Page 57: Numéros De Modèle Et De Série

    Si votre scie à chaîne électrique à manche télescopique REMARQUE : si vous notez quoi que ce soit d'inhabituel, Sun Joe SWJ803E nécessite une intervention technique ou ® par exemple une vibration ou un son étrange, arrêtez un entretien, veuillez appeler le 1-866-SNOWJOE immédiatement la scie.
  • Page 58 + Sun Joe soit pour autant tenue ® ® de donner un préavis desdits changements. Les accessoires peuvent être commandés en ligne sur le site sunjoe.com ou par téléphone en appelant le service clientèle Snow Joe + Sun Joe au 1-866-SNOWJOE (1-866-766-9563).
  • Page 59 LA PROMESSE DE SNOW JOE + SUN JOE À SES CLIENTS ® ® Vous êtes notre client et Snow Joe, LLC (« Snow Joe ») SE MET EN QUATRE pour vous servir. Nous nous efforçons de vous rendre l’utilisation de nos produits aussi plaisante que possible. Malheureusement, il peut arriver qu’un produit Snow Joe , Sun Joe ®...
  • Page 60 sunjoe.com...

Table of Contents