Table of Contents
Advertisement
Quick Links
OPERATOR'S MANUAL
A Division of Snow Joe
, LLC
®
THANKS
OF A REMANUFACTURED PRODUCT.
To make sure you get the most out of
your product, be sure to register online at
to enjoy full product support.
R
ELECTRIC POLE CHAIN SAW
8-INCH | 6.5-AMP
Model SWJ800E-RM
FOR
snowjoe.com
PASTE UPC LABEL HERE
YOUR
Let Gravity Do The Work
Form No. SJ-SWJ800E-RM-880E-V1
PURCHASE
®
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for sunjoe SWJ800E-RM
Summary of Contents for sunjoe SWJ800E-RM
- Page 1 8-INCH | 6.5-AMP OPERATOR’S MANUAL Model SWJ800E-RM A Division of Snow Joe , LLC ® Form No. SJ-SWJ800E-RM-880E-V1 THANKS YOUR PURCHASE OF A REMANUFACTURED PRODUCT. To make sure you get the most out of your product, be sure to register online at snowjoe.com...
-
Page 2: General Safety
OPERATOR’S MANUAL Model SWJ800E-RM A Division of Snow Joe , LLC ® Form No. SJ-SWJ800E-RM-880E-V1 IMPORTANT! substantial non-skid footwear, and close-fitting clothing is recommended when working outdoors with power tools. Safety Instructions 10. Wear protective hair coverings to contain long hair. -
Page 3: Electrical Safety
Electrical Safety 4. To prevent the appliance cord from disconnecting from the extension cord during operation, use the cord restraint hook and/or make a knot with the two cords as shown in 1. Ground fault circuit interrupter (GFCI) protection should Table 1. - Page 4 • Do not allow the pole chain saw to make contact with • Use the low-kickback chain and guide bar supplied with grounded objects such as pipes, fences, and metal posts. this pole chain saw. Only use genuine Snow Joe ®...
-
Page 5: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand and follow all instructions in the Keep bystanders and children user manual(s) before attempting... -
Page 6: Technical Data
Know Your Electric Pole Chain Saw Read the owner’s manual and safety instructions carefully before operating the pole chain saw. Compare the illustration below to the pole chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. -
Page 7: Carton Contents
Unpacking Installing + Replacing the Guide Bar + Chain Carton Contents Tools and supplies required: • Electric pole chain saw • Hex key allen wrench + blade screwdriver (supplied) • 8 in. (20.3 cm) cutting chain • Heavy-duty work gloves •... - Page 8 4. Lay out the new saw chain in a loop and straighten 6. Position the chain so there is a loop at the back of the bar. any kinks. THE SHARP SIDE OF THE TEETH MUST Hold the chain in position on the bar and place the loop FACE AWAY FROM YOU IN THE DIRECTION OF THE around the sprocket (Fig.
-
Page 9: Operation
8. Tighten the chain tensioner screw only enough to hold the NOTE: A cold chain is correctly tensioned when there bar and chain in place (Fig. 7), ensuring the chain is still in is no sag on the underside of the guide bar; the chain place over the sprocket. - Page 10 WARNING! Always keep your hands on the handles, KICKBACK Fig. 12 away from the chain. Do not overreach. DANGER ZONE A good, firm grip on the tool using both hands will help you maintain control. When using the pole chain saw, place one hand on the front handle foam grip and the other hand on the rear handle with your thumbs and fingers encircling the pole and handle.
-
Page 11: Cutting Tips
Fig. 16 Fig. 13 Collar Safety lock button Cord restraint Trigger switch 4. Make sure you fully tighten the collar before operating the 5. To turn the tool OFF, release the trigger switch (Fig. 13). saw. Check it periodically for proper tightness during use to avoid serious injury. - Page 12 Basic Cutting Procedure Load Fig. 18 This unit is designed for trimming small branches and limbs up Second cut to recommended 6.5 in. (16.5 cm), not to exceed a max cut of 7.5 in. (19 cm) in diameter depending on the wood type. Practice cutting a few small limbs using the following technique to get the “feel”...
-
Page 13: Maintenance
Minimize Kickback • Only use original Snow Joe + Sun Joe replacement ® ® parts. Parts that are not of the same quality can seriously Kickback may occur when the moving chain contacts an damage the equipment, compromise safety, and invalidate object at the upper portion of the tip of the guide bar or when the warranty. -
Page 14: Chain Sharpening
• Check that the depth limiter tooth does not stick out ® SWJ800E-RM electric pole saw online at snowjoe.com or, farther than the inspection tool and file any projecting parts with a flat file, rounding off the edges (Fig. 21). -
Page 15: Troubleshooting Table
Chain Sprocket Troubleshooting Table Regularly check the condition of the sprocket and replace it Problems Corrective Action when wear exceeds 0.5 mm (Fig. 22). Do not mount a new chain with a worn sprocket or vice-versa. The saw • Check that you installed the extension cord motor fails properly into the pole saw power cord receptacle to start... -
Page 16: Model And Serial Numbers
Support If your Sun Joe SWJ800E-RM electric pole chain saw ® requires service or maintenance, please call 1-866-SNOWJOE (1-866-766-9563) for assistance. Model and Serial Numbers... - Page 17 Optional Accessories WARNING! ALWAYS use only authorized Snow Joe + Sun Joe replacement parts and accessories. NEVER use ® ® replacement parts or accessories that are not intended for use with this saw. Contact Snow Joe + Sun Joe if you are unsure ®...
- Page 18 SNOW JOE + SUN JOE REFURBISHED GOODS WARRANTY ® ® GENERAL CONDITIONS: Snow Joe + Sun Joe may from time to time change the design ® ® of its products. Nothing contained in this warranty shall be Snow Joe + Sun Joe operating under Snow Joe , LLC warrants ®...
- Page 19 snowjoe.com WARNING! This product or its power cord contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known [to the State of California] to cause cancer, birth defects, or other reproductive harm.
Need help?
Do you have a question about the SWJ800E-RM and is the answer not in the manual?
Questions and answers