Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for sunjoe SWJ805E-RM
Summary of Contents for sunjoe SWJ805E-RM
- Page 1 ELECTRIC POLE + CHAIN SAW 8-INCH | 6-AMP | 2-IN-1 POLE + HANDHELD OPERATOR’S MANUAL Model SWJ805E-RM A Division of Snow Joe , LLC ® Form No. SJ-SWJ805E-RM-880E-M-V1 © 2021 by Snow Joe , LLC SAVE THESE INSTRUCTIONS ® All rights reserved. Original instructions.
-
Page 2: General Safety
OPERATOR’S MANUAL Model SWJ805E-RM A Division of Snow Joe , LLC ® Form No. SJ-SWJ805E-RM-880E-M-V1 IMPORTANT! substantial non-skid footwear, and close-fitting clothing is recommended when working outdoors with power tools. Safety Instructions 10. Wear protective hair coverings to contain long hair. -
Page 3: Electrical Safety
Electrical Safety WARNING! 1. Ground fault circuit interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for Electric shock may cause SEVERE INJURY or the electric pole + chain saw. Receptacles are available DEATH. Heed these warnings: having built-in GFCI protection and may be used for this •... - Page 4 Specific Safety Rules Operating Tips for Chain Saws • Keep all parts of the body away from the saw chain when WARNING! SHOCK HAZARD! – To protect yourself the chain saw is operating. Before you start the chain saw, from electrocution, do not operate the electric pole + chain make sure the saw chain is not contacting anything.
- Page 5 Kickback • Do not bury the guide bar nose or try to cut by boring the guide bar nose into the wood. KICKBACK • Watch for shifting of wood or other forces that may pinch the chain. DANGER ZONE • Use extreme caution when re-entering a previous cut. •...
-
Page 6: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, Keep bystanders and children and follow all instructions in the a safe distance away. -
Page 7: Technical Data
Know Your Electric Pole + Chain Saw Read the owner’s manual and safety instructions carefully before operating the electric pole + chain saw. Compare the illustration below to the electric pole + chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. -
Page 8: Carton Contents
Unpacking WARNING! Before performing any maintenance, make sure the tool is unplugged from the power supply. Failure to Carton Contents heed this warning could result in serious personal injury. Installing/Replacing the • Electric chain saw Guide Bar and Chain • Telescoping pole •... - Page 9 2. Remove the cutting bar and chain from the mounting Fig. 6 surface (Fig. 3). Fig. 3 Cutting bar Loop Chain 6. Hold the chain in position on the bar and place the loop around the sprocket. Fit the bar flush against the mounting surface so that the bar studs are in the long slot of the bar 3.
- Page 10 9. Remove all slack from the chain by turning the chain 2. While pulling the handle lock, use the other hand to grasp tensioner screw clockwise until the chain seats snugly the front hand grip and slide the removable cutting head against the bar with the drive links flush inside the bar up to remove it (Fig.
-
Page 11: Operation
Operation Chain Saw Assembly 1. To remove the cutting head from the telescoping pole, Starting and Stopping PULL the cutting head lock back to release, and grasping the front hand grip, SLIDE UP to remove the cutting head CAUTION! (Fig. 14). •... - Page 12 4. To turn the tool ON, push and hold the safety lock button CAUTION! The chain will continue to run for several (located on the removable handle) with your thumb and seconds after turning off the tool. then squeeze the trigger with your fingers. Once the tool is Do not use the electric pole + chain saw under wet conditions.
- Page 13 3. Extend the pole to the desired length (Fig. 21). Fig. 23 NOTE: Push poles toward each other to shorten the pole or pull them away from each other to lengthen the pole. Hex key wrench Only extend the pole to the minimum length required to reach the limb to be cut.
- Page 14 Basic Cutting Procedure • Release the trigger ON/OFF switch as soon as the cut is completed. Failure to follow proper cutting procedures will This unit is designed for trimming small branches and limbs up result in the bar and chain binding and becoming pinched to recommended 6.5 in.
-
Page 15: Bucking A Log
Basic Cutting Procedures Bucking a Log WARNING! WARNING! Do not cut limbs or trees that are larger Do not buck logs that are larger than the than the maximum cutting thickness. maximum cutting thickness. • Practice cutting a few small logs using the following Bucking is the process in which a log is cut into lengths. -
Page 16: Maintenance
WARNING! For your safety and that of others: Fig. 28C • Correct maintenance is essential to maintain the original efficiency and safety of the machine over time. • Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition. •... -
Page 17: Chain Sharpening
® farther than the inspection tool and file any projecting SWJ805E-RM electric pole + chain saw by ordering online at parts with a flat file, rounding off the edges (Fig. 30). sunjoe.com or, to order by phone, contact Snow Joe ®... -
Page 18: Troubleshooting Tips
Daily Checklist, Cleaning Chain Sprocket and Storage Regularly check the condition of the sprocket and replace it when wear exceeds 0.5 mm (Fig. 31). Do not mount a new chain with a worn sprocket or vice-versa. Daily Checklist To help maintain your electric pole + chain saw for optimum Fig. -
Page 19: Model And Serial Numbers
Support If your Sun Joe SWJ805E-RM electric pole + chain saw ® requires service or maintenance, please call 1-866-SNOWJOE (1-866-766-9563) for assistance. Model and Serial Numbers... - Page 20 NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®...
- Page 21 NOTES...
- Page 22 NOTES...
- Page 23 SNOW JOE ® + SUN JOE ® REFURBISHED GOODS WARRANTY Snow Joe + Sun Joe may from time to time change the design of ® ® GENERAL CONDITIONS: its products. Nothing contained in this warranty shall be construed Snow Joe + Sun Joe operating under Snow Joe , LLC warrants...
- Page 24 sunjoe.com...
Need help?
Do you have a question about the SWJ805E-RM and is the answer not in the manual?
Questions and answers