Operating The Product - Beko DIN14C10 User Manual

5

Operating the product

12
1. Programme Indicator Light
2. Tablet Detergent Indicator
3. Salt Level Indicator Light
4. Time Delay Indicator
5. Start / Stop Indicator Light
6. Start / Stop Button
Push in the on/off button and check
•
that the programme indicator lights
come on.
Check the salt and rinse aid level
•
indicator lights before you start the
machine. If necessary add salt and
rinse aid.
Select the required programme by
•
referring to the programme chart.
Select the desired programme by
•
using the Programme Selection
Button.
You may use Half Load/Combi Tablet
•
button - Delayed Start Button
features as necessary.
Press start/pause/cancel button.
•
Close the door then programme starts.
•
An audio signal with an interval of 8
•
seconds warns you to switch your
machine off when the selected
washing programme ends. This
audible signal will warn you 10 times
before it turns off.
/35 EN
22
1 2 3 4 5
11 10
9 8
7. Time Delay Button
8. Rinse Aid Indicator Light
9. Half Load Indicator Light
10. Half Load / Tablet Detergent Button
11. Programme Selection Button
12. On/Off Button
A
Do not open the dishwasher
door whilst the appliance is in
operation. However, in case
the door is opened while the
machine is working, then a
safety mechanism ensures the
machine immediately stops.
Water may be very hot, so be
careful.
A
Care must be taken when
opening the door, as steam will
escape.
Press the on/off button after the
•
programme is completed. The
indicator lights will go off.
Unload the baskets - we recommend
•
to turn off the water tap when not in
use.
Dishwasher / User's Manual
7 6