Table of Contents
Advertisement
Operating the product
6-
Read "Safety Instructions" section first!
Read "Quick Quide" before this
section.
On/Off key
When you press the On/Off key, the
product that is in the On position will switch
on with the Eco programme.
Programme Selection /
Programme Cancel key
Select the programme by pressing the
desired programme key.
Press the Start / Pause / Cancel key for 3
seconds to cancel the running programme.
Function Keys
If you press any of the Function keys
during programme selection or time delay
selection, the indicator of the function will
flash if the programme you have selected
supports the selected function.
To cancel the selected function, press the
function key again.
Preparing the machine
1. Open the door of the dishwasher.
2. Place the dishes in accordance with
the instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent into
the detergent dispenser.
5. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
Programme selection
1. Press the On/Off button to turn on your
machine.
26/EN
2. Refer to the table of "Programme data
and average consumption values"
to determine a washing programme
suitable for your dishes.
3. Selected programme will start when
you close the door of your machine.
Additional functions
Washing programs of the machine are
designed to achieve the best cleaning
performance by considering the soil level,
the amount of dirt and the characteristics of
the dishes to be washed in the machine.
Additional functions have been added to
help you save time, water and energy and
to perform a more hygienic and comfortable
washing, thanks to the customized features
settings.
Additional functions may change the
duration of the selected program.
Additional functions are not suitable for
all washing programs. The indicator of
the function that is not suitable for the
program will not be active.
Functions that can be used in washing
programs are shown with letters
such as " A,B,D,E,G,F,K..." in the
"Program information and average
consumption values table. You can
find instructions on the use of these
functions in the "Additional functions"
section of the user manual.
Some auxiliary functions cannot be
used together. If the function you
selected is not active even though it
appears in the "Program information
and average consumption values
table", you can activate it after turning
off the other auxiliary functions.
Advertisement
Table of Contents
