Advertisement

Dishwasher
Dishwasher
DIN14C10
User's Manual
User's Manual

Advertisement

Table of Contents
loading

Summary of Contents for Beko DIN14C10

  • Page 1 Dishwasher Dishwasher DIN14C10 User’s Manual User’s Manual...
  • Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
  • Page 3: Table Of Contents

    CONTENTS 1 INSTRUCTIONS FOR SAFETY 5 OPERATING THE PRODUCT 22 How to cancel the washing AND ENVIRONMENT programme ......... 23 General safety ........4 How to change the washing Intended use ..........4 programme ......... 23 Children’s safety ........5 Half Load Function ......23 Disposing of packaging material ..5 Tablet Detergent Function ....
  • Page 4: Instructions For Safety And Environment

    InstructIons for safety and envIronment This section contains safety electric shock! instructions that will help to Never touch the plug with • give protection from risk of wet hands! Never unplug by personal injury or property pulling on the cable, always damage.
  • Page 5: Children's Safety

    InstructIons for safety and envIronment It must be used to do the Store all detergents and • • domestic type dishes only. additives in a safe place This appliance is intended away from the reach of the • to be used in household and children.
  • Page 6: Compliance With Weee Directive And Disposing Of The Waste Product

    InstructIons for safety and envIronment Compliance with WEEE collection points designated by the local authorities. Directive and Disposing of the Waste Product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
  • Page 7: Dishwasher Overview

    Dishwasher Overview 1. Upper impeller 2. Lower basket 3. Lower impeller 4. Rating Label 5. Control panel 6. Door 7. Detergent dispenser 8. Filters 9. Cutlery basket 10. Salt reservoir lid 11. Upper basket rail 12. Upper basket 13. Condensing Drying System 7 / 35 EN Dishwasher / User’s Manual...
  • Page 8: Condensing Drying System

    Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2006/95/EC, 2004/108/EC, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
  • Page 9: Installation

    Installation To make the product ready for use, Do not install the product at places • make sure that the electricity, tap water where temperature may fall below supply and water drainage systems are 0ºC. appropriate before calling the Authorised Place the product on a rigid floor.
  • Page 10: Connection To The Drain

    Installation Connection to the drain Electrical connection Water discharge hose can directly be Before you insert the plug into the wall connected to the drain hole or sink’s socket make sure that the voltage and drainage. The length of this connection the frequency shown in the rating label must be min.
  • Page 11: This Appliance Must Be Earthed

    Installation Connect the brown (live) wire to the This appliance must terminal in the plug marked ‘L’ or be earthed coloured red. If the fitted moulded plug is not suitable for your socket, then Green and yellow the plug should be cut off and or green an appropriate plug fitted.
  • Page 12: Preparation Tips For Energy Saving

    Preparation Tips for energy saving operates with the same performance continuously. Dishwasher salt is used for Following information will help you use the this purpose. product in an ecological and energy-efficient Use only special softening salts manner. produced particularly for the Wipe away any coarse food remnants on dishwashers in your machine.
  • Page 13: Water Hardness & Regeneration Settings

    Preparation 2. Turn the salt reservoir lid counter 4. Replace the lid and tighten it securely clockwise to open it (A, B). when the reservoir is full. 5. If you will not start a washing programme Salt reservoir will fill with water immediately after adding the salt, run the when you start the product.
  • Page 14 Preparation Test Strip 1 second Level 1 No Lime Level 2 Very low lime content Level 3 Low lime content Level 4 Medium lime content 1 minute Level 5 High lime content Very High lime content Level 6 Remove the Let the water Take the test strip Hold for...
  • Page 15: Detergent

    Preparation Warning Indicator” (if any) illuminates Only use in the machine continuously on the panel of your machine. the detergents produced If the water hardness adjustment is set to particularly for use with level 1, the “No salt warning indicator” will dishwashers.
  • Page 16: Tablet Detergents

    Preparation Inside the detergent dispenser, Excessive usage of powder there are level markings that detergents will cause the help you use appropriate detergent not dissolve amount of detergent. When completely and will also cause brimful, detergent dispenser scratches on the glassware. will contain 40 cm³...
  • Page 17: Rinse Aid

    Preparation Open the lid of the rinse aid reservoir 2in1: Contains detergent, rinse aid or water by pressing its latch (B). softening salt 3in1: Contains detergent, rinse aid and water softening salt 4in1: Contains glass protectors in addition to detergent, rinse aid and water softening salt 5in1: Contains glass and stainless steel protectors in addition to detergent, rinse aid...
  • Page 18 Preparation increased and if there is a blue trace Place thin, narrow pieces in the middle • after wiping them by hand, it must be sections of baskets if possible. decreased. This is set to position 4 as There are two separate baskets in •...
  • Page 19 Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware 19 / 35 EN Dishwasher / User’s Manual...
  • Page 20: Cutlery Basket

    Preparation Cutlery basket Push the latches back into the correct position. Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an efficient manner. Since the cutlery basket can be moved (A, B), you can create more space while placing your dishes in the lower basket and free up space for your dishes of different sizes.
  • Page 21: Collapsable Lower Basket Tines

    Preparation Collapsable lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause The six piece foldable tines (A) located them to bend. Therefore, it at the lower basket of the machine are will be appropriate to bring the tines in the middle to horizontal designed for an easier placement of large...
  • Page 22: Operating The Product

    Operating the product 2 3 4 5 1. Programme Indicator Light 7. Time Delay Button 2. Tablet Detergent Indicator 8. Rinse Aid Indicator Light 3. Salt Level Indicator Light 9. Half Load Indicator Light 4. Time Delay Indicator 10. Half Load / Tablet Detergent Button 5.
  • Page 23: How To Cancel The Washing Programme

    Operating the product How to cancel the washing The new programme will NOT start right from the beginning. programme It will start from the stage last To cancel a programme while the machine carried out by the previous is operating: programme selection.
  • Page 24: Warning Sound And Inner Illumination Settings (Depends On Model)

    Operating the product is over, the selected programme will start automatically. Cancelling the delay function Keep the Start/pause/cancel button pressed for 3 seconds. The selected delay period will be cancelled. As soon as the cancelling starts, the water remaining in your machine will be drained for 30 seconds due to safety reasons.
  • Page 25 Operating the product 25 / 35 EN Dishwasher / User’s Manual...
  • Page 26: Maintenance And Cleaning

    Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in order cleaned at regular intervals. for the machine operates efficiently. Check if food residues are left on the filters.
  • Page 27: Cleaning The Hose Filter

    Maintenance and cleaning Cleaning the impellers 4. Clean all three filters under tap water by means of a brush. Clean the impellers at least once a week in 5. Replace the metal/plastic filter. order for the machine operates efficiently. 6. Place the coarse filter into the Lower impeller microfilter.
  • Page 28: Upper Impeller

    Maintenance and cleaning Upper impeller Check if the holes on the upper impeller (1) are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to remove the upper impeller (A, B). Make sure that the nut is tightened well when installing the upper impeller.
  • Page 29: Troubleshooting

    Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. • Door of the machine is open. >>> Make sure that you have closed the door of the machine. • On / Off button is not pressed. >>> Make sure that you have turned on the machine by pressing the On / Off button. Dishes are not washed clean • Dishes are not placed orderly in the machine. >>> Load the dishes as described in the user manual. • Selected programme is unsuitable. >>> Select a programme with a higher temperature and cycle time. • Impellers are stuck. >>> Prior to starting the programme, turn the lower and upper impellers by hand to make sure that they rotate freely. • Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with food remnants such as lemon pips.
  • Page 30 Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed. Slightly open the door and wait for evacuation of the steam inside for a while. Unload the dishes after the pieces cool down to a touchable level.
  • Page 31 Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
  • Page 32 Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing. • Opening of the detergent dispenser lid is prevented during washing. >>> Place the dishes in a way that will not prevent the detergent dispenser lid from opening and the water going into the machine from impellers.
  • Page 33 Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid. • Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the supply water appropriately and check the water hardness setting.
  • Page 34: Guarantee

    The cost of functional replacement • parts, but excluding consumable is recommended for all Washing items. Machines, Dishwashers and Electric The labour costs of a Beko approved Cookers • repairer to carry out the repair Gas Cookers must only be installed by •...
  • Page 35 If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee agreement document. Otherwise please call the appropriate number above where service can be obtained at a charge. Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line. Tel: 0845 6004911 e-mail: service@beko.co.uk...

Table of Contents