How To Cancel The Washing Programme; How To Change The Washing Programme; Half Load Function; Tablet Detergent Function - Beko DIN14C10 User Manual

Operating the product
How to cancel the washing
programme
To cancel a programme while the machine
is operating:
Open the door.
•
A
! Care must be taken when
opening the door, as steam will
escape.
Press and hold start/pause/cancel
•
button for 3 seconds. The start /
stop indicator light will start flashing.
Close the door. The machine will drain
the water inside the machine for 45
seconds.
The programme is cancelled when
•
start/stop indicator light goes off.
Then, you can choose and start a new
programme.
C
Depending on the stage of the
programme you have cancelled,
there may be detergent residue
or rinse aid inside the machine
and on the load. Make sure the
items in the dishwasher are not
used before washing properly.
How to change the washing
programme
To change the programme selection while
the machine is operating:
Open the door.
•
A
Care must be taken when
opening the door, as steam will
escape.
Press start/pause/cancel button. The
•
indicator light will go off.
Select the new programme. Press
•
start/pause/cancel button. The
indicator light will be on and new
programme will start.
Dishwasher / User's Manual
C
The new programme will NOT
start right from the beginning.
It will start from the stage last
carried out by the previous
programme selection.

Half Load Function

If you want to run your machine without
loading it completely, place your dishes into
the machine as you desire. Press the On/
Off button to turn on your machine. Press
the Half Load/Combi Tablet button after
selecting the desired program until Half
Load Indicator lights up, then press start/
pause/cancel button and close the door of
your machine. With the Half Load option
you can use every part of your lower and
upper baskets and you can save by using
less water and power.

Tablet Detergent Function

Depending on the hardness level of
the tap water, the Tablet Detergent
function allows obtaining a better drying
performance from the multi-purpose
detergents such as 2in1, 3in1, 4in1,
5in1, etc., called all-in-one tablets. The
programmes in which the tablet detergent
function can be enabled are indicated in
the Programme Data and Table of Average
Consumption Values. Tablet Detergent
Indicator lights when the Tablet Detergent
function is selected. Salt and Rinse Agent
indicators turn off when this function is
activated.

Time Delay

Using the Delayed Start button, you may
delay the starting time of your programme
up to 9 hours . After delaying the start,
press Start/Cancel button and close the
door of your machine. Once the delay time
23 / 35 EN