Panasonic Diga Blu-ray DMR-BCT950 Operating Instructions Manual page 91

Picture
Still Mode
Select the type of picture shown when you pause
play.
• Field:
Select if jittering occurs when "Automatic" is
selected. (The picture is coarser.)
• Frame:
Select if small text or fine patterns cannot be
seen clearly when "Automatic" is selected.
(The picture is clearer and finer.)
Sound
Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
• This does not work depending on broadcasts
and recorded titles.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
• Select "Surround encoded", when the
connected equipment supports the virtual
surround function.
• There is no effect on "Bitstream" via HDMI AV
OUT and DIGITAL AUDIO OUT terminal.
• The audio will be output in "Stereo" in the
following cases.
- AVCHD playback
- [BD-V] : Playback of clicking sound on the
menu and audio with secondary video in
picture-in-picture mode.
Bilingual Audio Selection
Select whether to record the audio type ("M1" or
"M2") when:
- File Conversion ( 55)
- Copying to a DVD-R, DVD-RW, +R and +RW.
Digital Audio Output
PCM Down Conversion
Check the sampling frequencies supported
by the coaxial input of the connected device.
If the device does not support certain
sampling frequencies, set the appropriate
frequency setting.
• On (48 kHz):
The maximum sampling frequency of
signals is limited to 48 kHz.
(Choose if the connected device does not
support signals with a sampling frequency
of 96 kHz or 192 kHz.)
• On (96 kHz):
The maximum sampling frequency of
signals is limited to 96 kHz.
(Choose if the connected device does not
support signals with a sampling frequency
of 192 kHz.)
• Off:
Signals are output as 192 kHz.
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
Select the audio signal to output.
• Select "PCM" when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
System Volume Adjustment
If the volume of a programme being watched
through this unit is different than the volume
of a programme being watched directly on the
TV, changing this setting may reduce the gap.
(This function works only while you are
watching a programme or playing back a
programme recorded in DR mode with this
unit.)
BD-Video Secondary Audio
Turn on/off the clicking sound on the menu
and audio with secondary video.
Convenient functions
91
SQT0802