Panasonic Diga Blu-ray DMR-BCT950 Operating Instructions Manual page 37

Manually programming timer
recording
1
Press [PROG/CHECK].
Timer Recording HDD 30:30 DR
Channel Name Schedule
New Timer Programme
2
Select "New Timer Programme", then press
[OK].
3
Select the items and change the items.
( right, Timer recording options)
4
Press [OK].
The timer programme is stored.
Timer Recording HDD
Channel Name
Programme Name
New Timer Programme
To confirm and edit the timer programme
Refer to "To confirm and edit a timer programme".
( 39)
Operation during Recording
Refer to "Operation during Recording". (
• When recording from the external equipment, "Mode"
(recording mode) is XP, SP, LP, EP or FR.
• Signal Supported Recording is disabled when a manually
programmed timer recording is set.
TUE 06.01.2015 8:05
Space
Mode
30:30 DR TUE 06.01.2015 8:05
Schedule Space
Mode
WED 07.01
OK
DR
8:00 - 9:00
32)
Timer recording options
Select the items and change the items.
e.g.,
Timer Recording HDD 30:24 DR
Channel Day/Date Start Stop Mode
1 WED 07.01 8:00 9:00 DR
Title Name
OK
RETURN
Category/AV Date or Weekly?
Channel
• You can select Category/AV with the red button.
Day/Date
• You can select "Date" or "Weekly" by pressing
the green button.
• Auto Renewal Recording
(Only daily/weekly timer recording)
The unit will record the new programme over
the old one.
Press the yellow button.
"Renew : ON" is displayed.
Start/Stop
• Press and hold [3, 4] to alter in 15-minute
increments.
Mode/Conv.
Refer to step 2. ( 31)
Subtitles
You can choose whether or not to record the
subtitle at conversion.
(Only when item other than "OFF" is selected in
"Conv.")
Title Name
1 Select "Title Name", then press [OK].
2 Refer to "Entering text". (
To use Signal Supported Recording
You can choose whether or not to use the Signal
Supported Recording function by pressing the
blue button.
Recording
TUE 06.01.2015 8:05
Signal Supported : OFF
Conv. Subtitles
OFF OFF
Signal Supported Rec
103)
37
SQT0802