Operating Instructions Blu-ray Disc™ Recorder DMR-BWT760 Model No. Getting started Watching broadcasts Recording Playing back video Editing video Copying video Photo and Music Thank you for purchasing this product. Please read these instructions carefully before using this Network product, and save this manual for future use.
Safety precautions WARNING CAUTION Unit Unit • To reduce the risk of fire, electric shock or • This unit utilizes a laser. Use of controls or product damage, adjustments or performance of procedures other than those specified herein may result in - Do not expose this unit to rain, moisture, dripping or splashing.
R6/LR6, AA Indemnity concerning recorded content (Alkaline or manganese batteries) Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content (data), and does not guarantee any content if recording or editing does not work properly.
Unit care Getting started When moving the unit HDD/USB HDD handling care Before moving the unit, ensure the disc tray is empty. • The HDD is a high precision recording 1 Switch the unit to standby mode. (Wait until instrument and is easily susceptible to damage. “BYE”...
Main unit Front Pull to flip down the front panel. 1 Disc tray Inserting or removing media 2 Display ( ∫ Disc 3 Remote control signal sensor • Angle: Approx. 20° up and down, 30° left and right Disc •...
Display 5 SD card slot indicator 1 Drive (HDD, BD or SD) indicator 6 USB port indicator 2 Main display section indicator 7 Playback indicator • Messages and other information are 8 Remote control signal indicator displayed.
Remote Control Instructions for operations are generally described using the remote control. 1 Transmit the remote control signal • Point it at remote control signal sensor on this unit. ( 2 Switch the unit from on to standby mode or vice versa 3 Select channels and title numbers, etc./Enter ...
• Before connection, turn off all equipment and read the appropriate operating instructions. • Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
Connect the Set Top Box or video equipment • When using a TV or an amplifier/receiver that does not • Connect to terminals of the same colour. display “ARC” on the HDMI terminal, it is necessary to connect the TV and the amplifier/receiver with a digital audio cable to enjoy the TV audio on the amplifier/receiver.
After you make the LAN cable/Wireless LAN connection, the network setting is needed. Manufacturer and Code No. 12, Easy Network Setting) Manufacturer Code Manufacturer Code Panasonic 01/02/03/04 LAN cable connection NOBLEX AIWA NOKIA 25/26/27/60/61 AKAI 27/30 NORDMENDE...
Easy Setting To stop partway Press [RETURN Turn on the TV, then select the appropriate To restart setup ( 70, Auto Setup) AV input to suit the connections to this unit. Press [Í] on the remote control or [Í/I] on this unit.
Search for wireless network: To restart Easy Network Setting The available wireless networks will be displayed. 1 Press [FUNCTION MENU]. ( Select your network name and press [OK]. 2 Select “Basic Settings” in “Setup”, then press - If your Network name is not displayed, search [OK].
HDD and media information For more details, refer also to the specifications. ( Recordable/playable contents (–: Impossible) Media type Standard symbol Recordable contents Playable contents • Video • JPEG • DSD • AVCHD/AVCHD 3D • MPO • FLAC Built-in hard disk drive [HDD] •...
It cannot be recorded directly. (Only compatible with copying from the built-in HDD) §1 Recorded with AVCHD format compatible devices (Panasonic video camera, etc.). It may not be §2 able to play back, add, or edit depending on the device.
Information about contents About extension of files ∫ Broadcast Recordings Example of file Contents Numbers of titles that can be recorded: extension Maximum “.mkv” Media titles “.srt” 3000 “.sub” (Subtitle text files) BD-RE, BD-R “.txt” DVD-RAM, DVD-R, DVD-RW “.mp4” +R, +RW “.mov”...
Recording mode (Conversion) Recording Mode HG/HX/HE/HL/HM XP/SP/LP/EP/FR §1 Feature Programmes can be Recording can be done Recording can be done recorded in a nearly with reduced recording with reduced recording perfect broadcasted state. volume in High definition volume in Standard definition (SD) quality.
Notes for the disc Notes for the SD cards • Region management information • Compatible SD card The unit can play back BD-Video/DVD-Video - SD Memory Card discs of the following regions codes, including (from 8 MB to 2 GB, FAT12 and FAT16 “ALL”: formats) - SDHC Memory Card...
FUNCTION MENU FUNCTION MENU list screen • Keyword Recording ( • TV Guide ( You can easily access the desired functions, such as playback, timer recording, the unit’s settings • Timer Recording ( etc. via the FUNCTION MENU. • Network Service ( Press [FUNCTION MENU].
Watching broadcasts Current Category Watching broadcasts Audio Description [For_New_Zealand] 3 Set timer ( Press [INPUT SELECT] and select “TV”, 4 Subtitle then press [OK]. 5 Teletext 6 Multiple audio Press [CH W X] to select the channel. 7 Data service ( •...
Switching audio Using TV Guide system Press [AUDIO]. Press [GUIDE]. • Audio will switch according to the contents of TV Guide screen appears. the programme every time it is pressed. e.g. Landscape view [For_New_Zealand] [For_Australia] To listen to the Audio Description Landscape TV Guide Category: All Digital Channels...
Using Channel List Display information While pausing or rewinding a broadcast: You can select from the list of channel names. Press [STATUS Press [OK]. Pause XXXXX XXXXX All Digital Channels XXXXX • Press [STATUS ] again. Select View Page up Page down...
Recording Recording To change the recording (conversion) mode TV programmes This unit will record the programmes in DR mode once, and then automatically convert to the selected recording mode while this unit is in standby. • This unit can record two programmes being 1 Press [OPTION].
Operation during Recording To pause recording After displaying the recording programme, press To check the recording programme [;]. • Press again to restart recording. Press [STATUS (A title is not split into separate titles.) e.g., While recording two programmes simultaneously Recording programme REC1/OTR AUTO •...
Timer recording To edit the timer recording on the TV Guide screen 1 Select the programme to edit, then press the red button. • You can enter up to 32 programmes within a 2 Select “Timer Rec Edit”, then press [OK]. month in advance.
To search the programmes • If the signal is not sent correctly, the recording may lack the 1 On the TV Guide screen: beginning or the ending part of the programmes. Press [OPTION]. • If the same episode has already been set for series timer 2 Select the item, then press [OK].
Timer recording options Timer recording from Channel Information Select the items and change the settings. You can make timer recording of the current or e.g., [For_Australia] next programme. Timer Recording 30:24 DR TUE 05.01.2016 XXXXX While watching a programme Date Guide Link : OFF Press [STATUS Channel...
To confirm and edit a timer Screen icons programme Red: Timer recording standby is activated. Display the Timer recording list. Grey: Timer recording standby is 1 Press [FUNCTION MENU]. deactivated. 2 Select “Timer Recording”, then press [OK]. Currently recording programme (Red) e.g., A part or all of the programme will not...
Keyword Recording Keyword Recording conditions Search Conditions: Keyword 1-16 Input the keyword to be registered. The unit can find programmes that include • Refer to “Entering text”. ( specified keywords from programme names and • Default keyword is the programme title programme information on TV Guide, and record selected on the TV Guide screen.
To add/edit the Keyword To display the list of programmes found with the set keyword Select the Keyword and press [OK], then make required settings. Press the yellow button in “Keyword Recording” screen. • Refer to “Keyword Recording conditions” SAT 22.01 Schedule Programme Name XXXXXX - XXXXXX...
Playing titles Playing Video Menu screen back video on the HDD e.g., § Video Menu Grouped Titles “For recorded titles ( 17)” only § Time Remaining 45:54 (DR) Keyword Record Not Viewed Xxxxxx Xxxxxx AVCHD Channel Date Title Name Titles...
Screen icons You can quickly find the recorded titles by Currently recording programme selecting the tab. (Red) Protected title To select the tab Press [2, 1]. Title was not recorded due to recording protection To change the displayed programme type tab Title cannot be played 1 Select the programme type, then press the (When data is damaged etc.)
Editing the grouped titles Playing Keyword Recording titles 1 Select the title or the group, then press the Select “Keyword Record” tab. yellow button. • A check mark is displayed. Repeat this step. Video Menu Time Remaining 45:54 (DR) • Press the yellow button again to cancel. Keyword Record Not Viewed Xxxxxx...
Playing titles Video list screen on the media e.g., § Video Menu \ Video \ Parent Folder Folder 01 Folder 02 video01.mpeg 08/02/2013 13:45 “For data files ( 17)” only § video02.mpeg 08/02/2012 12:45 video03.mpeg 08/02/2011 11:45 video04.mpeg 08/02/2010 10:45 Insert the media.
• Display items differ depending on what is Video Menu ( AVCHD ) screen recorded in each media. [SD] If the menu screen is not displayed, display it by performing the following operation. e.g., 1 While stopped Video Menu ( AVCHD ) Press [FUNCTION MENU].
Operation during play Search Press  or . • Press [1 a1.3] to restart play. • The speed increases up to 5 steps. ([+R] [+RW]: Up to 3 steps) • MKV, MP4 and MPEG2: Audio is not heard during all •...
Manual Skip Switching subtitles Skip forward 1 minute: [HDD] [USB_HDD] (For recorded titles, [BD-RE] [BD-R] Press [+60s]. 1 Press [STTL Skip backward 10 seconds: 2 Press [OK]. Press [-10s]. 3 Select “On” or “Off”, then press [OK]. • If you want to switch the subtitle language, •...
3D settings during playback • Please refrain from viewing 3D images if you do not feel Change this setting when the screen is not well or are experiencing visual fatigue. correctly displayed for 3D compatible In the event that you experience dizziness, nausea, or other programmes.
Playback menu Basic Operation Soundtrack § A variety of playback operations and settings can Show or change the soundtrack. be performed from this menu. [For_Australia] Audio Selection Available options differ depending on the playing Switch in the case of multiple audio. contents and the condition of the unit.
Sound Effect Settings Picture Settings DSD Decode Sampling Frequency Picture Type Select the settings that suit your sound quality Select the picture quality mode during play. preferences. Sharpness Adjustment DSD LPF Setting Noise Reduction Select the settings that suit your sound quality Luminance/Colour Adjustment preferences.
Deleting/Editing titles Editing video Editing recorded titles Once deleted, divided or partially deleted, content cannot be restored to its original On the Video Menu screen: state. Make certain before proceeding. Select the title. • Multiple selection ( left) § Press [OPTION]. “For recorded titles ( 17)”...
Partial deleting File Conversion [HDD] [USB_HDD] [BD-RE] [BD-R] [RAM] [HDD] [USB_HDD] 1 Select “Partial Delete” in “Edit”, then press File Conversion is a function to convert the [OK]. recording mode of the title in DR mode and AVCHD contents. The size of the converted title 2 Press [OK] at the start point and end point to delete.
To cancel a “During standby” conversion 3 Select the item, then press [OK]. After performing steps 1–2 ( 41, Editing Convert & Delete: recorded titles) The original title will be deleted to save HDD 1 Select “File Conversion” in “Edit”, then press capacity after conversion.
Editing chapters Deleting video files on the HDD [HDD] [USB_HDD] [BD-RE] [BD-R] [RAM] On the video list screen: 1 Select “Chapter View”, then press [OK]. Select the file or folder. 2 Perform the editing operations. e.g., Edit Chapter Mark: Select the point where you want to start a new Video Menu \ Video \ chapter while viewing the title.
Copying titles To register the external HDD (USB HDD) Copying video §1, 2, 3 To copy HD Video (AVCHD) to the DVD-R in High Definition ( To copy video files ( Release the disc protection ( §1, 3 To change the selection “For recorded titles ( 17)”...
Setting the copying options Copying from media other than HDD with Video Menu 1 Select the item in step 7 ( 45). e.g., [BD-RE] [BD-R] [RAM] [+RW] > [HDD] Insert a disc. Automatic Standby after Copy The menu screen appears. ( Select “Play Video”, then press [OK].
Copying titles with copying list Register titles for copy. 1 Select “Create List”, then press  (right). ,. [USB_HDD] [HDD] 2 Select “New item”, then press [OK]. [BD-RE] [BD-R] [RAM] [DVD-R] > 3 Select the title, then press the yellow [HDD] [DVD-RW] [+R] [+RW] button.
Make other settings. Editing the copying list 1 Select “Other Settings”, then press 1 Select the title after step 4-4 ( 47).  (right). e.g., [For_Australia] Copy Cancel All Destination Capacity: 21000 MB Copy ( 66% ) Size: 14000 MB Copy Direction Size Title...
Notes for copying Normal speed copy • [DVD-R] [DVD-RW] [+R] [+RW] You cannot copy to High speed copy the disc in the following cases. High Speed Copying is the process of copying a - When there is not enough free space on the title to disc in high speed while maintaining the HDD.
Copying a finalised disc Copying Title Playing [DVD-V] > [HDD] [HDD] > [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW] While playing a disc, the content being played is copied to the HDD according to the set time. Play back the title to copy. •...
About the screen icons - Without the AVCHD information (video recorded with Refer to “Screen icons”. ( certain non-Panasonic equipment, video copied to the HDD after copying it to BD-R or BD-RE once, etc.) • 3D video may not be copied correctly.
Photo Photo and Music Photo play option While displaying a photo: §1 §2 §3 Press [OPTION]. Select the item, then press [OK]. Graphic Display Level You can change the 3D position of the “For data files ( 17)” only (JPEG, MPO) §1 screen display, etc., during the 3D photo [BD-RE] only...
Photo Menu screen Slideshow settings e.g., [HDD] On the Photo Menu screen: Press the green button. Photo Menu Slideshow 03.01.2012 Start Slideshow 29.10.2012 Interval Normal 25.02.2013 15.03.2013 Transition Effect Fade Repeat Play Music Selection No background music Background Music No List Page 0002/0002 Page Up...
Editing photos Selecting and copying the photos [HDD] [BD-RE] [RAM] [SD] > [BD-RE] [RAM] [SD] [HDD] [BD-RE] [RAM] [DVD-R] [+R] On the Photo Menu screen: > [HDD] [SD] [CD] To edit the folder: > [HDD] [BD-RE] [RAM] [USB_HDD] [SD] [USB] Select the folder.
Music Copying automatically §1 §2 [USB_HDD] [BD-RE] [RAM] > [HDD] [DVD-R] [+R] [CD] [SD] [USB] “For data files ( 17)” only §1 Newly added photos will automatically be copied [DVD-R] [+R] only §2 to the HDD. Insert the media. Playing music CD (CD-DA) The menu screen appears.
Screen icons Copying music [USB] > [HDD] [USB_HDD] [DVD-R] [+R] [CD] § Folder Except [CD] (CD-DA) § Music On the music list screen: Select the file or folder. Move to the parent folder e.g., Playing music file on the HDD Music Menu \ Music \ Parent Folder...
• TV Anytime services may be discontinued temporarily or discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the permanently without notice. content or the continuity of the services.
Preparation equipment. • Perform Home Network settings. ( http://panasonic.jp/support/global/cs/ Operate the playback equipment (Client) to (This site is in English only.) display the list of contents on this unit. Select the item, then press [OK].
.wma FLAC .flac • If you want to display the playback menu while playing back .dsf, .dff a video on the Panasonic DLNA compatible equipment, ALAC .m4a press [AUDIO]. • Playlist of Windows Media Player can play back only the Linear PCM –...
Using this unit as Media Renderer Using Smart Home Networking (DLNA) with Wi-Fi Direct ® This unit will work as Media Renderer, which allows you to play back the contents on DLNA Wi-Fi Direct is a standard that enables wireless Server by operating a Digital Media Controller (a LAN devices to communicate each other directly smartphone, etc.).
When no devices are found Using Miracast You can enjoy the content you are viewing on a Wi-Fi Direct Connection Miracast-compatible smartphone, etc. on the big Device not found. To connect with a Wi-Fi Direct compatible device, screen of your TV. please check connection mode of pairing device and select “Search again”.
• Connect the Set Top Box or video equipment “For data files ( 17)” only § • If you want to change the recording mode e.g., Connecting to the Panasonic video camera 23, To change the recording (conversion) mode) Press [INPUT SELECT] and select “AV”, then press [OK].
Please use a recommended USB HDD. For the latest information on recommended USB HDDs, please check the following website. http://panasonic.jp/support/global/cs/ • Certain non-recommended USB HDDs cannot be used with this unit. • If a problem occurs with the USB HDD, please contact the manufacturer of the device.
Connecting the USB HDD Registering the USB HDD Connect this unit with optional USB HDD. • If the registering screen appears when connecting the USB HDD, go to step 5. e.g., This unit’s rear panel Press [FUNCTION MENU]. Select “Basic Settings” in “Setup”, then press [OK].
What is VIERA Link? VIERA Link is a convenient function which will link You can operate this unit using the TV remote the operations of this unit and a Panasonic TV control. (VIERA) or an amplifier/receiver. You can use this...
• You can also download the latest software (firmware) from (Default setting is 3 a.m. 78, Software Update the following website. http://panasonic.jp/support/global/cs/ in Standby) • From broadcasts ([For_New_Zealand]) Software of this unit will be updated from broadcasts if update information is detected.
4K Networking Other operations You can save 4K videos/photos recorded with Media management digital cameras and other 4K-compatible devices to the HDD of this unit and play them back. [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW] [SD] Press [FUNCTION MENU]. Select “Media”, then press [OK].
Top Menu • [DVD-R] [DVD-RW] [+R] If you finalise discs recorded on Panasonic equipment other than this unit, the background [DVD-R] [DVD-RW] [+R] [+RW] selected as “Top Menu” may not be displayed. • Discs finalised on this unit may not be playable on other You can select the background for DVD-Video players due to the condition of the recording.
Create Top Menu Switching the aspect ratio of the screen [+RW] You can create Top Menu for displaying on other When the image does not match the screen size of equipment. the TV, you can enlarge the image to fill the screen. Make selections from “Top Menu”...
Basic Settings Setup • To delete channels: Select the channel in the “Favourites” column, You can change the unit’s settings of Digital TV then press [OK]. Tuning, Sound, Display, Connection, Network etc. • Yellow: Delete all channels. in the menu. •...
Child Lock ( Parental Rating ) HDD / Disc / USB HDD You can restrict the viewing of channels unsuitable to children. Settings for Playback Set a ratings level to limit broadcast viewing and 3D BD-Video Playback playback. Select the playback method of 3D compatible •...
Settings for Recording HDD Management Press and hold [OK] for 3 seconds to show the Timer Record Start Buffer following settings. This function sets the timer recording to start earlier than the TV Guide time. Delete all titles Delete all recorded programmes and AVCHD Timer Record Stop Buffer on the built-in HDD.
Cancellation of all USB HDD Registrations Bilingual Audio Selection This function cancels the registrations of all Select whether to record the audio type (“M1” or the USB HDDs registered on this unit. “M2”) when: Only do this if you are going to dispose of this - File Conversion ( unit.
3D AVCHD Output Audio Delay If 2D AVCHD video is recognised as 3D video Mis-sync between the video and audio is and cannot be played back correctly, you may corrected by delaying the audio output. be able to play it by changing the setting. Audio Type for Digital Broadcast 3D Playback Message If the programme has more than one track (Dolby...
Network 24p Output When playing BD-Video recorded in Easy Network Setting 24 frames, this unit displays each frame at 1/24 second intervals–the same interval Press [OK] to start Easy Network Setting. ( originally shot with the film movie. Network Settings •...
Proxy Server Settings Initialize Device Password Check and set the connection to the Proxy The device password for this unit is server. initialized. • Press [OK] to show the respective setting. • When you initialize the device password, you will not be able to use TV Anytime. Network Service Settings To use the TV Anytime again, you must re-register to the service.
• Timer Setting for Quick Start: Panasonic products close together. “Quick Start” is activated when the set time • Use “BD 1”, the factory set code, under normal comes.
Clock System Update If the time is not set correctly, use the settings Software Update in Standby listed in the method below. When you set this unit to standby mode, • Automatic software (firmware) updates ( 66) are This unit usually obtains time and date downloaded automatically at the time you information from digital broadcasts.
Troubleshooting guide The remote control does not work. Reference • The remote control and main unit are using different codes. Change the code on the remote Before requesting service, make the following control. checks. If the problem still persists, consult your dealer for instructions.
TV reception is not displayed. 3D video is not output correctly. • Broadcast signals are not output from this unit’s • 3D video may be output correctly by changing RF OUT terminal. Select “On” in “RF OUT the following settings: ( Aerial Signal )”.
Timer recording does not work properly. Play • When is displayed on the screen. ( Cannot play back. • The disc is dirty. ( Auto Renewal Recording does not work • The disc is scratched or marked. properly. • The disc may not be able to play back if it was •...
Photos do not play back normally. You cannot play contents properly from DLNA • The images that were edited on the PC, such as compatible equipment on the network. Progressive JPEG, etc., may not play back. • There may be some video that cannot be played back on DLNA compatible equipment depending on the equipment.
SW-DL Messages on the front panel display Software (firmware) is downloading. The following messages or service numbers appear on the Download will stop when the unit is turned on, or the timer front panel display when something unusual is detected. recording starts.
Specifications ∫ Wireless LAN Standard compliance: IEEE802.11a/b/g/n Specifications are subject to change without Frequency range: 2.4 GHz / 5 GHz band notice. Security: ∫ General WPA™/WPA2™ Dimensions: 430 mm (W) (Encryption type: TKIP/AES, Authentication type: PSK) 42.5 mm (H) (64 bit/128 bit) (including the projecting parts) 193 mm (D) ∫...
Audio information Language code list The audio output differs depending on which terminals are connected to the amplifier/receiver, Lingala: 7678 Abkhazian: 6566 Afar: 6565 Lithuanian: 7684 and the setting on this unit. ( 73, Digital Audio Afrikaans: 6570 Macedonian: 7775 Output) Albanian: 8381...
Licenses “AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and Sony Corporation. Copyright 2004-2014 Verance Corporation. Cinavia is a Verance Corporation trademark. Protected by U.S. Patent 7,369,677 and worldwide patents issued and pending under license from Verance Corporation. All rights reserved.
Basic Settings menu. At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other licenses with the...
Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period.
Index Favourites ......70 Finalise ......68 Format Aspect .
Quick Start ......77 USB HDD Cancellation of all USB HDD Registrations ......73 Recording .
The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content. Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your behalf.