Dvb-Via-Ip Server Function (Tv>Ip) - Panasonic Diga Blu-ray DMR-BCT950 Operating Instructions Manual

Network
Using DVB-via-IP Server Function (TV>IP)
The DVB-via-IP Server Function allows you to
stream TV broadcasts to a compatible device in
the same network. You can watch broadcasts on
a device provided with the DVB-via-IP Client
function.
e.g.,
DVB-via-IP Client
§
compatible equipment
SAT>IP Client device or device installed with a
§
SAT>IP Client app
Preparation
• Perform network connection and settings.
( 20, 24)
• Set "DVB-via-IP Server" to "On". (
To watch TV broadcasts on a DVB-via-IP
Client device:
Operate the DVB-via-IP Client device. (For details
on how to operate it, refer to its operating
instructions.)
76
SQT0802
• When "DVB-via-IP Server" is set to "On", this unit uses one
• The DVB-via-IP Server function can stream only one
• This unit will always be connected to the Internet when this
• When the DVB-via-IP Server function is in use, the
This unit
• [BCT950] It is not possible to use the DVB-via-IP Server
(DVB-via-IP Server)
• [BST950] It is not possible to use the DVB-via-IP Server
It is not possible to use the DVB-via-IP Server
96) function and another network function (Network
Service / Home Network) simultaneously.
In "Network Function Priority", priority can be
given to either "DVB-via-IP Server" or "Network
Service / Home Network".
Network Function Priority (
• DVB-via-IP Server
• Network Service / Home Network
tuner. As a result, the maximum number of programmes
that can be simultaneously recorded with this unit is
reduced by one.
broadcast at a time.
function is activated.
following operations cannot be performed:
- Playing back a title while copying another title in high
speed mode.
- Copying video/photos/music files
function if you change the "TV Signal Selection" setting
( 22). Change the setting of the DVB-via-IP Client device
again.
Function when "DiSEqC (Single Tuner)" is selected.
Select a setting that allows you to use two or more tuners.
( 23)
Changing the Network Function Priority
setting
Priority is given to the DVB-via-IP Server
function. When using the DVB-via-IP Server
function, it is not possible to use another
network function on this unit. Conversely, when
using the network function on this unit, it is not
possible to use DVB-via-IP Server function.
Priority is given to other network functions.
When using the DVB-via-IP Server function, if
you use another network function on this unit,
the former stops. Conversely, when using
another network function on this unit, it is not
possible to use the DVB-via-IP Server function.
96):