Table of Contents
Advertisement
Consult the table below for field descriptions.
Field
Filter Name
IP Version
Protocol
Policy
Source IP address
Source Port (port or port:port)
Destination IP address
Destination Port (port or port:port)
At the bottom of this screen, select the WAN and LAN Interfaces to which the filter
rule will apply. You may select all or just a subset. WAN interfaces in bridge mode or
without firewall enabled are not available.
Description
The filter rule label
IPv4 selected by default.
TCP, TCP/UDP, UDP, or ICMP.
Permit/Drop packets specified by the firewall
rule.
Enter source IP address.
Enter source port number or range.
Enter destination IP address.
Enter destination port number or range.
61
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AR-5381u and is the answer not in the manual?