Security; Ip Filtering - Comtrend Corporation AR-5381u User Manual

5.6 Security

To display this function, you must enable the firewall feature in WAN Setup.
For detailed descriptions, with examples, please consult
5.6.1

IP Filtering

This screen sets filter rules that limit IP traffic (Outgoing/Incoming). Multiple filter
rules can be set and each applies at least one limiting condition. For individual IP
packets to pass the filter all conditions must be fulfilled.
NOTE: This function is not available when in bridge mode. Instead,
Filtering performs a similar function.
OUTGOING IP FILTER
By default, all outgoing IP traffic is allowed, but IP traffic can be blocked with filters.
To add a filter (to block some outgoing IP traffic), click the Add button.
On the following screen, enter your filter criteria and then click Apply/Save.
Consult the table below for field descriptions.
Appendix A
59
- Firewall.
5.6.2 MAC