Table of Contents
Advertisement
4.3.11.2 Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or select the auxiliary functions.
See, "Auxiliary function selection".
You can also change the speed and temperature settings. See, "Spin speed selection" and
"Temperature selection".
C
If no change is allowed, the relevant light will flash for 3 times.
4.3.11.3 Adding or taking out laundry
1. Press the Start / Pause button to switch the machine to pause mode. The programme follow-up
light of the relevant step during which the machine was switched into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
5. Close the Loading Door.
6. Make changes in auxiliary functions, temperature and speed settings if necessary.
7. Press Start/Pause button to start the machine.
4.3.12 Child Lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid
any changes in a running programme.
C
If the Programme Selection knob is turned when the Child Lock is active, "Con" appears on the display. The Child Lock
does not allow any change in the programmes and the selected temperature, speed and auxiliary functions.
Even if another programme is selected with the Programme Selection knob while the Child Lock is active, previously
selected programme will continue running.
4.3.12.1 To activate the child lock:
Press and hold 1
st
Auxiliary Function buttons will flash, and "C03", "C02", "C01" will appear on the display respectively
while you keep the buttons pressed for 3 seconds. Then, "Con" will appear on the display indicating
that the Child Lock is activated. If you press any button or turn the Programme Selection knob
when the Child Lock is active, same phrase will appear on the display. The lights on the 1st and 2nd
auxiliary function buttons that are used to deactivate the Child Lock will blink 3 times.
4.3.12.2 To deactivate the child lock:
Press and hold 1
and 2
st
1
and 2
Auxiliary Function buttons will flash, and "C03", "C02", "C01" will appear on the display respectively while
st
nd
you keep the buttons pressed for 3 seconds. Then, "COFF" will appear on the display indicating that the Child Lock is
deactivated.
C
In addition to the method above, to deactivate the Child Lock, switch the Programme Selection knob to On / Off
position when no programme is running, and select another programme.
Child Lock is not deactivated after power failures or when the machine is unplugged.
4.3.13 Canceling the programme
To cancel the programme, turn the Programme Selection knob to select another programme.
Previous programme will be canceled. End / Cancel light will flash continuously to notify that the
programme has been canceled.
Your machine will end the programme when you turn the Programme Selection knob; however, it
does not drain the water inside. When you select and start a new programme, the newly selected
programme will start depending on the step the previous programme was canceled in. For example,
it may take in additional water or continue to wash with the water inside.
20 / EN
and 2
Auxiliary Function buttons for 3 seconds. The lights on the 1
nd
auxiliary function buttons for 3 seconds while any programme is running. The lights on the
nd
and 2
st
nd
Washing Machine / User's Manual
Advertisement
Table of Contents
