Pppoe - D-Link DWR-953 User Manual

Section 3 - Configuration
Username: Enter the PPPoE username provided by your ISP.
Password: Enter the PPPoE password provided by your ISP.
Verify Password: Re-enter the PPPoE password for verification.
Service Name: Enter the PPPoE service name provided by your ISP if applicable.
IP Address: Enter the IP address provided by your ISP here.
Primary DNS Enter the primary DNS server provided by your ISP here.
Server:
Secondary DNS Enter the secondary DNS server provided by your ISP here.
Server:
Enter the MAC address, or click Clone to clone your client's MAC
MAC Address:
address to the WAN port.
Maximum Idle Enter a maximum idle time during which the Internet connection
is maintained during inactivity (if you select Auto-reconnect
Time:
below, this setting will have no effect).
MTU: Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your ISP. The default value is 0.
Auto-reconnect: Check the box to allow the router to automatically attempt to
reconnect whenever the Internet connection is lost.
NAT disable: Click the checkbox to disable Network Address Translation(NAT).
D-Link DWR-953 User Manual

PPPoE

12