Carbon Brushes; Maintenance And Storage - Qualcast MEB1334M Instruction Manual

Maintenance
Blade Maintenance (continued)
If the blade is blunt, it can be sharpened in a specialised workshop. If the blade is damaged or
showing signs of imbalance, it must be replaced.
IMPORTANT! Always wear work gloves when engaging in any maintenance work.
Only replace the blade with a genuine replacement blade as this will ensure top performance and
safety under all conditions.
Carry out the following steps to change the blade:
• Turn the mower over.
•
Hold the blade firmly. Undo the fastening screw.
•
Remove the blade and sharpen, or replace it with a new one.
• When fitting the blade, make sure it is installed the right way up. The blade's wings should be
angled upwards (towards the mower).
• Retighten the fastening bolt. The tightening torque should be approx. 25 Nm.

Carbon Brushes

In case of excessive sparking, have the carbon brushes checked only by a qualified electrician.
Important! Carbon brushes should only be replaced by a qualified electrician.

Maintenance and Storage

• There are no parts inside the mower which require additional maintenance.
• Store in a dry place, out of reach of children.
20 Customer Helpline 08456 400 800