Page 1
Qualcast 1300W Electric Rotary Mower (Model: MEB1334M) Instruction Manual After Sales Support UK/Ireland 08456 400 800 www.argosspares.co.uk Important - Please read these instructions fully before starting assembly These instructions contain important information that will help you get the best from your mower, ensuring it is assembled correctly and safely.
Safety Information Important - Please read these instructions fully before starting assembly Warnings Symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembly and operating the mower. Take extra care, beware of hazards. Read instruction manual.
Safety Information Important - Please read these instructions fully before starting assembly Warnings Symbols (continued) 34 cm Cutting width Important! When using equipment, the following safety precautions must be followed to avoid injuries and damage. • Read all operating instructions carefully and comply with them. It is important to understand these instructions and to acquaint yourself with the machine, its correct usage and all safety requirements.
Safety Information Important - Please read these instructions fully before starting assembly Personal Safety Note! Only supply power to the equipment through circuit protected by an RCD with a maximum trip current of 30 mA. • Use only plugs or connectors approved for outdoor usage. •...
Page 6
Safety Information Important - Please read these instructions fully before starting assembly Personal Safety (continued) • Never run the mower in enclosed or poorly ventilated rooms or if there are inflammable or explosive fluids, vapours or gases nearby. • Switch off the motor and disconnect the mains lead before clearing blockages in the grass ejection area and before you inspect it if the mower has struck a foreign body.
Safety Information Important - Please read these instructions fully before starting assembly Personal Safety (continued) • If the lawn mower begins to vibrate abnormally, switch it off immediately, disconnect the plug immediately and check it carefully. Ensure that all the nuts, bolts and screws are tight and that the mower is in a safe condition for use.
Page 8
Safety Information Important - Please read these instructions fully before starting assembly Operating and Maintenance Safety (continued) • Disconnect from the mains supply (i.e. remove the plug from the mains socket) whenever leaving the machine unattended, before cleaning a blockage, after striking a foreign object, whenever the machine starts vibrating abnormally.
Assembly Step 1 - Bottom Handle Support Assembly • The bottom handle support is attached to the deck on either side using a bolt, washer and plastic quick release lever. If the handle is not pre-fitted in the box push the bolt (from the inside towards the outside) through the deck, handle, then washer, and fasten into the metal retainer in the plastic lever, in that order.
Assembly Step 2 - Top Handle Assembly • The top, curved handle section is assembled to the bottom handle supports using a bolt, washer and quick release lever on either side. Adjust the height to suite the operator as necessary by inserting the bolt into the required holes on the handle (2c). •...
Page 13
Assembly Step 2 - Grass Collector Assembly (continued) 5a. Clip the handle into the top half of the grass box 5b. Align the fronts end of the top half and the bottom half of the grass collector box. Clip the two halves together starting at the front.
Operating Instructions & Tips Setting the Cutting Heights (continued) IMPORTANT! Ensure the power cord is disconnected from the mains supply before adjusting the cutting height. To adjust the cutting height, gently pull the height adjustment lever towards you to disengage it from its existing position and move it to the desired cutting height position.
Operating Instructions & Tips ON/OFF Operation 1. Press on the lock-off safety button to unlock the on/off lever 2. Then operate the on/off lever to switch the mower on. Customer Helpline 08456 400 800...
Operating Instructions & Tips To Stop the Machine Release the on/off lever to stop the motor Always ensure the on/off switch is working correctly. Do not use if you suspect a fault. Ensure that the blade is not rotating and that the power supply is disconnected before examining the switch.
Operating Instructions & Tips Mowing Advice We recommend that you mow in overlapping lines. Only mow with sharp blades so that the blades of grass do not fray. This can cause grass to turn yellow. To achieve a good cut, guide the lawn mower in lines that are as straight as possible.
Maintenance Cleaning & Maintenance Always disconnect the mains power plug engaging in any cleaning work. Cleaning • Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a soft brush or blow it with compressed air at low pressure after usage. •...
Maintenance Blade Maintenance (continued) If the blade is blunt, it can be sharpened in a specialised workshop. If the blade is damaged or showing signs of imbalance, it must be replaced. IMPORTANT! Always wear work gloves when engaging in any maintenance work. Only replace the blade with a genuine replacement blade as this will ensure top performance and safety under all conditions.
Troubleshooting General Troubleshooting The following table provides solutions to common problems encountered with the mower. Fault Possible Cause Solution Mower does not start No power at mains socket Check the fuse, switch, socket, cable, wire and have any repairs carried out by a qualified electrician Defective on/off switch Repair by a qualified technician...