Qualcast MEB1334M Instruction Manual page 13

Assembly
Step 2 - Grass Collector Assembly (continued)
5a. Clip the handle
5b. Align the fronts end of the top half and the bottom half of the grass collector box. Clip the two
halves together starting at the front.
5c. Once the front clips on either side are secure, work back on either side to secure each clip. This
method will help to keep the two halves of the box aligned.
5d. Finally, press the insert
is located securely in position. This insert assists the grass flow into the grass collector when the
grass collector is fitted to the mower.
ATTENTION! Never operate the mower unless the deflector guard and grass collector are fully
installed. Risk of injury!
Step 3 - Fitting / Removing the Grass Collector
5
4
• Lift the deflector guard
• Place the grass collector
grass collector fits snugly against the mower deck.
• Lower the deflector guard
• To remove the grass collector
the mounting bracket. Ensure the deflector returns down to its original position.
into the top half of the grass box
15
into the grass collector
17
7
on the mounting bracket at the back of the lawn mower. Ensure the
4
onto the grass collector
7
, lift the deflector guard
4
Customer Helpline 08456 400 800
16
as shown in 5d, and make sure the insert
4
7
6
17
– a spring tensioner holds it in place.
4
and unhook the grass collector from
7
13