Creating A Number Table - Casio fx-570EX User Manual

(Transposition) MatB 
To invert, square, and cube MatA (MatA
Note: You cannot use  for this input. Use  to input "
squaring, and (x
To obtain the absolute value of each element of MatB (Abs(MatB))

Creating a Number Table

The Table Mode generates a number table based on one or two functions.
Example: To generate a number table for the functions �� �� = ��
1
2
g �� = �� − for the range -1 ≦ �� ≦ 1, incremented in steps of 0.5
2
1. Press , select the Table Mode icon, and then press .
2. Configure settings to generate a number table from two functions.
(SETUP)(Table)(f(x),g(x))
1
2
3. Input �� +
2
1
2
4. Input �� −
2
5. Press . On the Table Range dialog box that appears, input values for
Start (Default: 1), End (Default: 5), and Step (Default: 1).
6. Press  to generate the number table.
• Press  to return to the screen in
step 3.
Tip
• In the number table shown in step 6, you can change the value in the
currently highlighted x cell. Changing the x value causes the f(x) and g(x)
values in the same line to be updated accordingly.
• If there is value in the x cell above the currently highlighted x cell,
pressing  or  automatically inputs into the highlighted cell the
value equal to the value of the cell above it plus the step value. So also,
3
) to specify cubing.
(Abs) MatB 
.
(x)12
.
(x)12
110.5
-1
, MatA
 MatA 
 MatA 
 MatA (x
27
2 3
, MatA )
",  to specify
-1
3
)
1
2
+
and
2