Casio fx-570EX User Manual page 8

Example: 17(≈)*
Norm: Displays calculation results in exponential format when they fall
within the ranges below.
Norm 1
Example: 1200(≈)*
* Pressing (≈) instead of  after inputting a calculation will display
the calculation result in decimal form.
Engineer Symbol On; Off
calculation results using engineering symbols.
Note: An indicator (E) is displayed at the top of the screen while On is
selected for this setting.
Fraction Result ab/c; d/c
improper fraction for display of fractions in calculation results.
Complex a+bi
polar coordinates for Complex Mode calculation results and Equation/Func
Mode solutions.
Note: An i indicator is displayed at the top of the screen while a+bi is
selected for the Complex setting. ∠ is displayed while r∠θ is selected.
Statistics On; Off
(frequency) column in the Statistics Mode Statistics Editor.
Spreadsheet
Auto Calc: Specifies whether or not formulas should be re-calculated
automatically.
◆
On ; Off
Show Cell: Specifies whether a formula in the edit box should be
displayed as it is or as its calculation result value.
Formula
Value: Displays the calculation result value of the formula.
Equation/Func On
numbers in solutions output in the Equation/Func Mode.
Table f(x); f(x),g(x)
the two functions f(x) and g(x) in the Table Mode.
Decimal Mark Dot
a comma for the calculation result decimal mark. A dot is always displayed
during input.
Note: When dot is selected as the decimal mark, the separator for multiple
results is a comma (,). When comma is selected, the separator is a
semicolon (;).
Digit Separator On; Off
character should be used in calculation results.
MultiLine Font Normal Font
font size when LineI/LineO or LineI/DecimalO is selected for Input/Output.
Up to four lines can be displayed while Normal Font is selected, and up to
six lines can be displayed with Small Font.
QR Code Specifies the version of the QR code displayed when
(QR) is pressed.
Version 3: Indicates QR code Version 3.
◆
Version 11
To initialize calculator settings (except the Contrast setting)
(RESET)(Setup Data)(Yes)
1.4286 × 10
> |x|, |x| ≧ 10
◆
-2
: 10
◆
; r∠θ
◆
Specifies whether or not to display a Freq
For configuring Spreadsheet Mode settings.
Enables or disables auto re-calculation.
◆
: Displays the formula as it is.
◆
; Off
◆
◆
; Comma
: Indicates QR code Version 11.
-1
(Sci 5)
, Norm 2: 10
10
-3
5 × 10 (Norm 1), 0.005 (Norm 2)
◆
Specifies whether or not to display
◆
Specifies either mixed fraction or
Specifies either rectangular coordinates or
Specifies whether or not to use complex
Specifies whether to use function f(x) only or
Specifies whether to display a dot or
◆
Specifies whether or not a separator
◆
; Small Font
7
> |x|, |x| ≧ 10
-9 10
Specifies the display