Table of Contents
Advertisement
English
Place the chain saw securely on the
N
ground – assume a steady stance-
the saw chain must not touch any
objects and also must not touch the
ground
WARNING
There must not be anyone within the
swivel range of the saw.
With the left hand on handlebar,
N
press the chain saw firmly against
the ground – thumb wrapped
around the handlebar
Place your right foot into the rear
N
handle
30
another possibility:
Clamp the rear handle between the
N
knees or thighs
Grip the handlebar firmly with the
N
left hand – thumb wrapped around
the handlebar
With the right hand, pull the starter
N
grip slowly until you feel it engage –
and then give it a brisk strong pull –
simultaneously press down on the
handlebar – do not pull the starter
rope out all the way – risk of
breakage! Do not let the starter grip
snap back – guide it vertically back
into the housing so that the starter
rope can rewind properly
With a new engine, pull the starter rope
several times to prime the fuel line.
MS 440
Hide quick links:
Advertisement
Table of Contents
