To set the Master Control lever to warm
start n, first set it to cold start l, then
push the Master Control lever into the
warm start n position.
Changing to warm start n is only
possible from the cold start l position.
When the throttle trigger is squeezed,
the Master Control lever returns from
warm start n to the operating
position F.
To switch off the engine, set the Master
Control lever to Stop 0.
MS 440
Starting / Stopping the
Engine
Only versions with decompression valve
Press the button, the
N
decompression valve will be
opened
It is closed automatically when the
engine starts for the first time.
For this reason, press the button
N
again before each additional
starting procedure
For all versions
Observe safety precautions
N
0
1
Push the hand guard (1) forwards:
N
The chain is blocked
Simultaneously press the throttle
N
trigger lockout (2) and throttle
trigger (3) – set the master control
lever
LT If the engine is cold
NL if engine is warm – once the engine
has been running for approx. one
minute
English
STOP
2
3
29