Advertisement
CoMMon aCCess CaRd (CaC) ConfIGuRaTIon and oPeRaTIon
SECTIONS
Table of Contents
CAC connection to the computer requires a separate USB cable
connection and allows the user to specify whether there is a CAC
required for that computer or not. This allows the CAC to be connected
and controlled separately to the keyboard, mouse, video and audio.
Belkin
Secure Ultra High Def DP/HDMI to DP/HDMI KVM Switch
®
1
2
3
step 1 – Installation
1.1 Using the included USB cable, connect one end of the cable to the
1.2 Enable CAC for the same port connection in Step 1.1 by switching
1.3 Repeat steps above for additional computers that require CAC.
1.4 Once configured, the CAC connection will be switched only when
22
4
5
5
computer that requires CAC, and the other end to the CAC port on
the Belkin Advanced Secure DisplayPort KVM that corresponds to
the computer.
the CAC switch to the right.
note: Make sure that the CAC switch is disabled (left) for all other
non-connected CAC systems.
required by the connected computer. When switching from a CAC
enabled port to a non-CAC enabled port, the CAC connection will
remain with the last previously selected port where the CAC was
set to enable.
6
7
Advertisement
