Before First Use; Control Panel - AEG BP7304021 User Manual

www.aeg.com
8

4. BEFORE FIRST USE

WARNING!
Refer to the Safety chapters.
4.1 Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and
Cleaning".
4.2 Setting and changing the
time
After the first connection to the mains,
all symbols in the display are on for
some seconds. For the subsequent few
seconds the display shows the software
version.

5. CONTROL PANEL

5.1 Electronic programmer
1
Use the sensor fields to operate the ap-
pliance.
2 3 4 5
Core temperature sensor
To measure how far the food is cooked.
After the software version goes off, the
display shows h and 12:00.
Setting the time of day:
1.
Touch or
2.
Touch or
3.
Touch or
4.
Touch or
The Temperature / Time display shows
the new time.
Changing the time of day
You can change the time of day only
when the appliance is off. Touch
flashes in the display. To set the new
time of day, use the above procedure.
6 7 8
to set the hours.
.
to set the minutes.
.
.
9 10