Table of Contents
Advertisement
SYM-
FUNCTION
BOL
TIME OF DAY
DURATION
END
SET+GO
7.1 Count Up Timer
Use the Count Up Timer to monitor how
long the appliance operates. It is on im-
mediately when the appliance starts to
heat.
Reset the Count Up Timer: touch
Touch
until the display shows
"00:00" and the Count Up Timer starts
to count up again.
You cannot use the Count Up
Timer when Duration or End is
set.
7.2 Setting the DURATION
1.
Activate the appliance and set an
oven function and temperature.
2.
Touch
again and again until the
display shows
display.
3.
Use
or
to set the minutes for
DURATION.
4.
Touch
to confirm.
5.
Use
or
to set the hours for
DURATION.
If you touch
set the DURATION, the appli-
ance switches to the setting of
the END function.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the dis-
play. The appliance deactivates.
To examine the time of day. For changing the
time of day refer to 'Setting the time of day'.
To set how long the appliance operates.
To set when the appliance deactivates. You can
use Duration and End at the same time (Time de-
lay), if the appliance is to be activate and deacti-
To start the appliance with necessary settings
with only one touch of the sensor field, any time
.
.
flashes in the
or
while you
DESCRIPTION
vate automatically later.
later.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
7.
Deactivate the appliance.
7.3 Setting the END
1.
Activate the appliance and set an
oven function and temperature.
2.
Touch
again and again until the
display shows
display.
3.
Use
or
to set the END (first
you set the minutes and then the
hours) and
4.
When the set time ends, an acoustic
signal sounds for two minutes.
symbol and the time setting flash
in the display. The appliance deacti-
vates.
5.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
6.
Deactivate the appliance.
7.4 Check result (selected
models only)
If you set the END or DURATION func-
tion, two minutes before the end of
cooking an acoustic signal sounds and
the lamp activates. The appliance goes
to the setting of the END or DURATION
function. During these two minutes you
can examine the results of the cooking,
and, if necessary, add the END or DURA-
TION time.
ENGLISH
13
.
flashes in the
or
to confirm.
Advertisement
Table of Contents
