Table of Contents
Advertisement
20 www.aeg.com
Indicator of the setting
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
2) Selected models only
You can set the settings menu
only when the appliance is off.
Activate the Settings menu:
1.
If necessary, deactivate the appli-
ance
2.
Touch and hold
onds.
The display shows "SET1" and "1"
flashes.
3.
Touch
4.
Touch
After the Automatic switch-off, touch a
sensor field to operate the appliance
again.
The Automatic switch-off works
with all oven functions, apart
from Slow Cook, Core tempera-
ture sensor, Duration, End, Time
delay.
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
menu
SET2
SET3
1)
SET4
SET5
SET6
SET7
2)
SET8
.
for three sec-
/
to set the setting.
.
Temperature
30 °C - 115 °C
120 °C - 195 °C
200 °C - 245 °C
250 °C - maximum °C
Description
RESIDUAL HEAT INDI-
CATOR
CLEANING REMINDER
KEY TONE
FAULTY TONE
SERVICE MENU
RESTORE SETTINGS
TIME EXTENSION
5.
Touch
of the setting.
6.
Touch
10.5 Automatic switch-off
For safety reasons the appliance deacti-
vates automatically after some time:
• if an oven function operates.
• if you do not change the oven temper-
ature.
display is lower between 10 PM and 6
AM.
• Day brightness:
– When the appliance is activated.
– If you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
– If the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
brightness.
Value to set
ON / OFF
ON / OFF
CLICK / BEEP / OFF
ON / OFF
---
YES / NO
ON / OFF
/
to change the value
.
Switch-off time
12.5 h
8.5 h
5.5 h
3.0 h
Advertisement
Table of Contents
