Advertisement
playback will start.
8. To stop playback, move the lift lever towards the back to raise the tone arm. The turntable
will still be rotating but the record will stop playing. To continue playback, move the lift lever
towards the front.
9. To play a different piece on the record, move the lift lever towards the back, move the raised
tone arm to the start of the piece and then move the lift lever towards the front to lower the
tone arm and start playback.
10. To adjust the volume level, turn the volume knob to the right or left.
11. At the end of the record, move the lift lever towards the back to raise the tone arm and
move it back to the tone arm park, and then move the lift lever towards the front to lower the
arm onto its rest.
12. Alternatively, lift the tone arm off the record and return it to the arm rest manually.
13. When you have finished playing records, engage the tone arm lock to protect it from
accidental movement. Turn the volume knob in a counterclockwise direction to switch the unit
off. Unplug it from the power supply if you are not going to use it for a while.
NOTE:
Should your record stop before the last track finishes, set the auto stop control to OFF.
Your record will now play to the end, but you will have to stop the turntable rotation manually.
(Return the tone arm to its rest manually and if the turntable is still rotating, switch off the unit
by the volume control knob. Then set the auto stop control back to ON.)
FAQs
If you are experiencing problems with your USB Turntable, check in the section below whether
there are any quick and easy checks you can do that may help you solve the problem. If you
cannot solve the problem by yourself, contact our after sales support line for advice. Do not
attempt to open, repair or modify the equipment yourself.
Problems with sound
• Clockwise rotate the power/volume knob to increase the volume.
• Make sure the unit's power cord is connected to an appropriate electrical outlet.
• Make sure the wall socket is switched on.
• Make sure the function switch is set to your desired function: PHONO,
• When playing records, make sure you have selected the correct speed (33, 45 or 78 rpm).
1
- 7 -
Advertisement
