Advertisement
Features
• Variable turntable speed (33, 45, 78 rpm)
• Automatic/manual stop turntable
• Belt-driven system
• 45 rpm adaptor included
• RCA line-out
• Built-in speaker with 2 x 1.5W output
Instructions
The record player
IMPORTANT!
When using the turntable:
• Make sure to remove the stylus protector, as illustrated on the right. (It should easily slide off
the stylus assembly.)
• Make sure to unclip the tone arm lock before use and to secure it again after use.
Playing a record
1. Open the dust cover and turn the volume knob clockwise to turn the equipment on.
2. Use the function selector to select PHONO mode.
3. Set the speed selector to the appropriate position: 33, 45 or 78, depending on the record to
be played.
4. Set the auto stop control to ON if you want the turntable to stop turning when it has reached
the end of the record. If the switch is set to OFF, the turntable will continue turning at the
end of the record.
5. Place the record on the turntable (use the 45 rpm adaptor, if required).
6. Move the lift lever towards the back to raise the tone arm from the arm park, then slowly
move the arm to the record, as illustrated on the right. The turntable will start rotating.
7. Move the lift lever towards the front, the tone arm will gently drop onto the record and
1
- 6 -
Advertisement
