Setting Up The Development Environment; Installing Cab Files - Casio IT-9000 Series Quick Start Manual

6. Setting Up the Development Environment

6.1 Installing CAB Files

1. After installing the library files, the CAB files in Table 6.1 will be installed in the folder
below.
Table 6.1
System Library
Bluetooth Library
Imager Library
WANGPRS Library
JPEG library
FLINK library
SAM Library
Printer Library
PrinGDI Library
MCR Library
NFC Library
Camera Library
Notes:
1. The library with "Yes" in "Preinstalled" column is preinstalled in IT-9000 and in the Device
Emulator. Thus, it is not necessary to install it, unless it has been updated or changed.
2. The CAB file, en_Flink.ARMV4I.CAB, in the table does not operate for IT-9000. Use the
FlinkLib.dll installed by default in the terminal.
2. Copy all the CAB files in Table 6.1 to any folder on IT-9000 via ActiveSync.
3. Carry out each CAB file.
4. When the installation starts, the installation status will appear.
C:\Program Files\CASIO\MBSYS\CAB
Library
en_SystemLib.ARMV4I.CAB
en_BluetoothLib.ARMV4I.CAB
en_ImagerLib.ARMV4I.CAB
en_WANGPRSLib.ARMV4I.CAB
enJPEG.ARMV4I.CAB
en_Flink.ARMV4I.CAB
en_SAMLib.ARMV4I.CAB
en_PrinterLib.ARMV4I.CAB
en_PrinGDILib.ARMV4I.CAB
en_PrinGDILibWM.ARMV4I.CAB
en_MCReadLib.ARMV4I.CAB
en_MCReadLibWM.ARMV4I.CAB
en_NFCLib.ARMV4I.CAB
en_NFCLibWM.ARMV4I.CAB
en_CameraLib.ARMV4I.CAB
en_CameraLibWM.ARMV4I.CAB
CAB file
48
Preinstalled
Yes
Yes
Yes
No
Yes
Yes (note 2)
Yes
Yes
Yes
Yes
Yes
Yes