Connecting Power Supply To Cradle; Ha-L60Io - Casio IT-9000 Series Quick Start Manual

4. Connecting Power Supply to Cradle

4.1 HA-L60IO

Use the dedicated AC adaptor (AD-S42120B) for supplying power to the HA-L60IO USB Cradle.
Ensure that you connect the AC adaptor to the cradle before starting communication between
IT-9000 and PC via the cradle. Follow the steps below to connect the power supply to IT-9000 using
the dedicated AC adaptor.
Figure 4.1
4. Plug the AC adaptor into the AC adaptor jack where "DCIN12V" is printed on the back of the
cradle.
5. After connecting the power cable to the AC adaptor, plug in the plug to an electrical outlet.
6. Make sure the selector switch on the back of the cradle is set to position B.
7.
A：Using as USB Host.
B：Using as USB Client.
※Only the USB device which Casio verified
is supported.
24