Windows Mobile Device Center Via Usb - Casio IT-9000 Series Quick Start Manual

5.2 Windows Mobile Device Center via USB

To establish connection via USB interface with PC runs in Windows 7, use Windows Mobile Device
Center ("WMDC"). The IT-9000 is setting to ActiveSync/WMDC by default.
Follow the steps below:
1. Install WMDC to the PC, if not installed.
2. Connect the USB cable to the PC and the other end to the USB Cradle and also the AC adaptor to
the USB Cradle.
3. Make sure the selector switch on the back of the cradle is set to position B.
4. Put IT-9000 on the cradle and confirm that the green LED on the front of the cradle is lit. If not,
be sure IT-9000 is positioned firmly on the cradle.
5. . Follow a message appeared in the WMDC on the PC.
38