Temporary System Hold - Uniden BCD396XT Reference Manual

Temporary System Hold

*For trunked systems,
**In Temporary System Hold state, Priority Scan and Close Call function are not performed.
The scanner scans only one system while displaying
"Temporary System Hold".
In this state, press [L/O] once to temporarily lock out a current system with Temporary L/O message.
Press [L/O] twice within one second to permanently lock out the current system with Locked out
message.
Long press this key to display the prompt Unlock All Systems? for unlocking all systems, sites, search
ranges and Close Call Hits system and enable all Quick Keys for all system/site.
Press [E / yes / gps] to unlock all data. Then scanner displays All Systems and Unlocked .
Press [. / no / pri] to return to the previous mode without unlocking.
In a trunked system, press [Scan / srch] key in Function Mode to change ID Search and ID Scan for the
system.
When you select a system while the scanner is Temporary System Hold without a timeout, the scanner
scans only the selected system.
If the selected system is locked out, it is automatically unlocks and scans the system. Other lockout states*
are not unlocked.
When it cannot scan the selected system, the scanner displays the system name on the first line and
Nothing to Scan the second line.
The scanner displays this message until you press any key. Then the scanner exits Temporary System Hold
Mode and starts scanning.
*
Quick Key for the selected system is disabled.
All channel groups for the selected system are locked out.
Quick key for all channel groups are disabled off.
All channels for the selected system are locked out.
Friday, November 07, 2008
F
System 1
Scan
S0: 1 2 3 4 5 6 7 8 9 0
GRP 1 2 3 - - - 7 - - -
means the following. The scanner displays Nothing to Scan .
.
F icon by pressing [FUNC] Key. This state is called
C
126