Uniden BCD396XT Reference Manual page 112

While in the Scan Mode, the first line displays currently scanned system, site or search range name and the
second line displays "SCAN" (for conventional System) or "ID SCAN", "ID SEARCH" (for trunked System)
scrolling from the right to the left, or a search frequency. Disabled Quick Keys are displayed as * . The
Quick Key for the Current System blinks.
System 1
SCAN
S0: 1 2 3 4 5 6 7 8 9 0
GRP 1 2 - 4 5 6 - - - 0
Scan for conventional system
Publi c Safety
30. 8600MHz
NFM
S1: 1 - - - - - - - - -
GRP - - - - - - - - - -
Service Search in Search with Scan
When all channels are locked out directly or indirectly*, the scanner displays "Nothing to Scan" and the
scanner stays in the Scan Mode.
*"A channel is locked out directly or indirectly" means:
1. The channel is locked out.
2. The group containing the Channel is locked out.
3. The Quick Key for groups to which that group belongs is disabled.
4. The system / site containing the channel is locked out.
5. The Quick Key for systems / sites to which that system belongs is disabled.
If the Channels are unlocked by cancellation of any of the above-mentioned states, the scanner will start
scanning immediately.
Friday, November 07, 2008
C Si te 2- 1
I D SCAN
NFM
S0: 1 2 3 4 5 6 7 8 9 0
GRP 1 - - - 5 - - - - -
ID Scan for trunked system
Custom 1
25. 0000MHz
AM
S1: - - 3 - - - - - - -
GRP - - - - - - - - - -
Custom Search in Search with Scan
Scan Mode
Nothi ng to Scan
S0: - - - - - - - - - -
GRP - - - - - - - - - -
MOT
112
Si te 3- 2 EDC
I D SEARCH
NFM
S0: 1 2 3 4 5 6 7 8 9 0
GRP 1 - - - - - 7 - - -
ID Search for trunked system
Close Call Hi ts
462. 6375MHz
NFM
S0: - - - - - - - - - -
GRP - - - - - - - - - -
Close Call Hits with Scan