Priority Scan - Uniden BCD396XT Reference Manual

Priority Scan

You can set following items in this menu.
Set Priority
Set Interval
MaxCHs/Pri-Scan
Press [E / yes / gps] to enter each setting.
Set Priority
This setting controls how the scanner treats Priority Channels.
You can select the following items.
Off The scanner provides no special treatment for Priority Channels.
On The scanner scans all unlocked Channels and also checks Priority Channels.
Plus On The scanner scans only Priority Channels.
Press [E / yes / gps] to set the Priority function and return to the previous menu.
Set Interval
This menu, lets you set the priority scan active interval time.
Press the number keys to enter the time, press [. / no / pri] to clear the input.
Note: Valid input range is from 1 to 10 sec.
If you enter 0 sec for the interval time, the scanner prompts Out of Range and Set Min?(Y/N) . Press
[E / yes / gps] to select the minimum value (1 sec). Press [. / no / pri] to return to the editing state.
If you enter over 10 sec for the interval time, the scanner prompts Out of Range and Set Max?(Y/N) .
Press [E / yes / gps] to select the maximum value (10 sec). Press [. / no / pri] to return to the editing state.
MaxCHs/Pri-Scan
You can set the Maximum priority channel numbers that are scanned during one priority scan interrupt
using this menu. If there are more scannable priority channels than the value you select, the channels are
divided into more than one group and the scanner scans each group in turn.
Note: The valid set range is from 1 to 100 channels.
Press the number keys to input the number. Press [E / yes / gps] to store the setting.
If you enter 0 for the max priority scan channels, the scanner prompts Out of Range and Set
Min?(Y/N) . Press [E / yes / gps] to select the minimum value (1 channel). Press [. / no / pri] to return to
the editing state.
If you enters over 100 for the max priority scan channels, the scanner prompts Out of Range and Set
Max?(Y/N) . Press [E / yes / gps] to select the maximum value (100 channels). Press [. / no / pri] to return
to the editing state.
Friday, November 07, 2008
94