Hardware Overview; Connectors And Buttons - Axis P5532–E User Manual

AXIS P5532–E PTZ Dome Network Camera

Hardware Overview

Hardware Overview
1.
Network connector
2.
Part number (P/N) & Serial number (S/N). Serial number may be required during installation.
3.
Control button
4.
SDHC card slot
5.
Status indicator LED
6. Restart button

Connectors and Buttons

For technical specifications, see page 53.
Network Connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
NOTICE NO NO TICE TICE
Use the supplied midspan.
NOTICE TICE
NO NO TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's
instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .
1
2
7
3 4 5 6