Inserting The Batteries To The Remote; Connect Power & Antenna; Switching On/Off; To Switch The Tv On - Finlux 42FME242S-T Owner's Manual

Inserting the Batteries to the Remote

1. Lift the cover on the back of the remote upward
gently.
2. Install two AAA batteries. Make sure to match the +
and - ends of the batteries in the battery compartment
(observe the correct polarity.)
3. Replace the cover.
Connect Power & Antenna
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket. After unpacking, allow the
TV set to reach the ambient room temperature before
you connect the set to the mains. Plug the aerial cable
into the ANT socket on your TV.

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz.
Then the standby LED lights up.
To switch on the TV from standby mode either:
• Press the " " button, P+ / P- or a numeric button
on the remote control.
" or P/CH+/- button on the TV.
• Press the "

To Switch the TV Off

Press the " " button on the remote control or hold
the " " switch on the Tv until shut down, so the TV
will switch to standby mode.
To power down the TV completely, unplug the power
cord from the mains socket.
Note: When the TV is switched to standby mode, standby LED
can blink to indicate that features such as Standby Search,
Over Air Download or Timer is active. The LED can also blink
when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the "language
selection" menu appears. The message "Welcome
please select your language!" is displayed and all
language options are listed alphabetically.
Press the "
language, press OK button to select. "First Time
Installation" appears. Use "
required country, and press "
Type. Use "
Available search types are Digital and analog, digital
only and analog only. When set, press "
Teletext Language. Use "
"Teletext Language" and select "Scan Encrypted" using
" " or "
Yes if you want to scan coded stations.
Press OK button on the remote control to continue and the
following message will be displayed on the screen.
You can activate Store mode option by using "
button. If Store Mode is selected, Store mode option will be
available in other settings menu and your TV's features will
be illustrated on the top of the screen. A confirmation
English - 8 -
" or " " button to highlight the required
" or "
" button to select Search
" or " " to set the desired search type.
" or "
" button. You can set Scan Encrypted as
" button to set the
" to select
" button to set the
" or " "