Ip Address; Mode; Wireless Connectivity; Connecting To A Wireless Network - Finlux 42FME242S-T Owner's Manual

• To access and play shared files, you must select the
Media Browser. Press the Menu button and select
Media Browser by using the " " or " " buttons and
press OK to continue. Select the desired file type and
press OK. You must always use the Media Browser
screen to access and play shared network files.
• PC/HDD/Media Player or any other devices that are
DLNA 1.5 compatible should be used with a wired
connection for higher playback quality.
To configure wired settings please refer to the
Network Settings section in the Settings menu.
• You might be able to connect your TV to your LAN
depending on your network's configuration. In such
a case, use an ethernet cable to connect your TV
directly to the network wall outlet.
Configuring Wired Device Settings
The Network type can be selected as Wired or
Wireless, in accordance with the active connection to
the TV set. Select this as "Wired" if you are connecting
via an ethernet.
Configuration Status
This section displays the status of the connection.
Select Connected if you want to activate a connection.
Select as Not Connected to end an active connection.

IP Address

If an active connection is available, the IP address will
be displayed on this section. If you want to configure
an IP address preference, press the GREEN button
and switch to the advanced mode.
Configuring Wired Network Settings in
Advanced Mode
After pressing the GREEN button, the "Advanced
mode" will be available. While in Advanced Mode,
press the RED button to edit settings. When finished,
press OK to save, Press RETURN/BACK to cancel

Wireless Connectivity

Connecting to a Wireless Network

IMPORTANT: USB dongle (Supplied) is required to
use wireless network features.
• To use your TV with your wireless network, you need
a Wireless USB dongle. To make your modem' s
SSID visible, you should change your SSID settings
via the modem's software. The TV cannot connect
to the networks with a hidden SSID.
To Connect to a wireless LAN, you should perform
the following steps:
1. Ensure that Nero Media Home software is
installed to your PC (for DLNA function).
2. Then connect the wireless adaptor to one of the
USB inputs of the TV.
3. To configure your wireless settings please refer to
Network settings section in this manual.
English - 16 -