LG LX54 SERIES Installation Manual page 51

09. Tint (Command: k j)
► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 00 to Green : 64
* Refer to 'Real data mapping'. See p. 53.
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE
menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 32
* Refer to 'Real data mapping'. See p. 53.
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
► To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
12. Remote control lock mode (Command: k m)
► To lock the front panel controls on the monitor
and remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use
this mode. When main power is on/off, external
control lock is released.
* In the standby mode, if key lock is on, TV will not
turn on by power on key of IR & Local Key.
13. Balance (Command: k t)
► To adjust balance.
Data L : 00 to R : 64
* Refer to 'Real data mapping'. See p. 53.
14. Colour Temperature (Command: x u)
► To adjust colour temperature. You can also
Data Warm: 00 to Cool:64
* Refer to 'Real data mapping'. See p. 53.
15. Energy Saving (Command: j q)
► To reduce the power consumption of the TV.
01 : OSD on
Power Saving
7
0
0
0
01 : Lock on
0
0
0
► 'Auto' is available in TV that supports 'Intelligent
EXTERNAL CONTROL DEVICE SETUP
You can also adjust balance in the AUDIO
menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
adjust Colour Temperature in the PICTURE
menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust Energy Saving in PICTURE
menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Level
Function
6 5 4 3 2
Low
0 0 0 0 0
Power
Low
0 0 0 0 0
Power
Low
0 0 0 0 0
Power
Low
0 0 0 0 0
Power
Low
0 0 0 0 1
Power
Low
0 0 0 0 1
Power
Sensor'.
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
51
Description
1 0
0 0 Off
0 1 Minimum
1 0 Medium
1 1 Maximum
0 1 Screen Off
0 0 Auto