Download Extra Contents; Download Extra Contents(Flash File) Totv Set - LG LX54 SERIES Installation Manual

42
CLOCK SETUP / DOWNLOAD EXTRA CONTENTS
y Program/Frequency : Select the program number or frequency to get the time information when
tuning on TV. If the current setting for clock source is 'DTV', you can get the clock information when
selecting the decided source and program. If the current setting for clock source is 'ATV', you can get
the clock information of teletext at the number of program. Set up the program in accordance with the
condition of the hotel clock source.
y Time Zone : The city corresponding to the state designated in the TV settings is set as default. You
can change the selected city to Offset. If the selected city is changed to Offset, you can change the
time value from GMT+12 to GMT-11.
y IP Address : You can set the IP address and port number to receive time information.
NOTE
Options of Clock Display, Dimming Standby and Dimming PowerOn are only available for the
y
models that support the external LED clock.
For clock setup, select 'YES' for Clock Display only if the LED clock is connected to your TV.
y
If you do not use the LED clock, select 'NO' for Clock Display. If you connect an external device,
other than the LED clock, to the port for the LED clock connection on the TV, it may cause damage
to the TV.
If the current setting for clock source is 'Pro:Centric', 'City' and 'Offset' deactivates.
y

DOWNLOAD EXTRA CONTENTS

(* Only for LX5**H, LX3**H series)

Download Extra Contents(flash file) toTV set

y The Pro:Centric application can be downloaded to your TV.
FLASH ( * .SWF) / GEM supporting file
An SWF file complied with Flash Lite 3.0 or earlier (the 3.0 version is recommended)
• Mode must be set to Flash or GEM under Pro:Centric in Installation Menu.
• The folder called /hcapfs/as/abs_service/ must exist in USB drive root directory.
• The file called xait.xml must exist in the /hcapfs/as/abs_service/ folder.
• The file called I_AM_FLASH must exist in the /hcapfs/config/ folder with Flash mode.The file
called I_AM_GEM must exist in the /hcapfs/config/ folder with GEM mode.
• You will have no response even if selecting Yes in step 3 when the above conditions are not met.
y Image shown may differ from your TV.
y Connect the USB device to the USB IN jack on the TV.