LG LX54 SERIES Installation Manual page 13

- OSD Display
Decide to display OSD or not by setting 'OSD Display' as Yes(Display) or No(Do not Display).
y When 'OSD Display' is set to 'No'(Do not Display), all OSD is not displayed except some
y
exception.
y Although select 'No' (Do not Display), the action that press a Menu button for 5 seconds
y
to enter 'Installation Menu' and entering service menu are available. (In-Start, Power-Only,
Adjust, Installation Menu ...)
- System Provider Mode
- 'System Provider Mode' allows access to the menu system from the front panel or remote control
but access is controlled as follows:
y When value is 'Yes', Accessible Items on the menu system, others are not permissible.
y
» Input select screens
» Sleep timer
» Alarm
» Aspect Ratio
» Closed Caption
» 'Lock' / 'My Media' / 'Network' / 'Support' / 'Bluetooth' Menu
y 'Q.menu', which is related to 'Setup' Menu, is not accessible.
y
y If the channel map is empty, 'Auto-tuning' guide dialog should be blocked by pressing 'List',
y
'Fav', 'CH+', 'CH-' keys.
Power Management
6
The Power Management feature will turn off the television receiver if no input control command is
received from either the Local or IR Key within a selected hours.
y Activity on either of these inputs shall restart the 'Power Management' timer and check key
y
time interval again.
y This entry can be set to a value which is corresponding to the desired hours (1 to 7).
y
y Default value is 'Off(disabled)'.
y
y TV should off and on after apply this setting.
y
7 DTV Programme Update
- It is a mode to set whether to update DTV channel information automatically or not.
y When DTV Channel Update is set to 'Auto', the function to update TV's programme map
y
according to DTV channel's stream information
y DTV Channel Update is set to 'Manual', the function to keep TV's channel map even though
y
DTV programme's information is changed.
8 Power On Default
Set the input source or channel to display and. A/V settings when turn on power in AC Power On or
Stand-by status.
- Input Source
Set whether it is turned on by the set input source or by the last stored input source.
y It is turned on by the Last Memory Input if the Input source is turned off.
y
y It is turned on by the Last Pr. If the Input source is turned off and the last memory Input is the
y
RF.
y The available Input Source values should be rotated.
y
y If both the Input source and the 'On Time' menu are set, the Input source takes the priority.
y
y When the Input source is changed to the TV, Programme menu is available.
y
y When the Input source is changed to the ATV, the Program No. is set to 0. (If the channel map
y
structure does not support this, it depends on model's channel handling.
y Access to an input source item and a channel in 'On Timer' menu must be disabled when
y
Power On Default is activated.
INSTALLATION MENU
13