LG LX54 SERIES Installation Manual page 29

6 Forced DVI Audio (* Except for LX540H series)
y When Forced DVI Audio is selected, the audio signal from the HDMI port will be transmitted through
the RGB, AV, or Audio In #1 component ports.
y The video signal will be transmitted through HDMI to be displayed on the screen in standard quality.
7 Screen Saver Cube
y When 'Screen Saver Cube' is set to 'No', TV will do not display LG Screen Cube.
8 One Channel Map
y If 'One Channel Map' is 'YES', the TV will operate as below.
A. When the TV is auto-scanning, it searches both air and cable channels.
B. In 'Programme Edit' window, all channels are shown in a single list regardless of input source.
(DTV/RADIO/TV) (For satellite supported models, a Satellite input source is also included.)
C. Select the 'Auto Sort' button in the 'Programme Edit' window to sort channels sequentially.
9 RS232 DC Power Outlet (* Only for LX5**H series)
y It is a mode to decide whether to output DC or not for power supply to IB Box in Installation Menu.
y
We offer a output terminal in one Pin of RS232C Jack for the use of communication.
y 5V DC Power Outlet and 12V DC Power Outlet must operate mutually exclusively. That is, only one
y
of the two sides must be turned on.
y You can select 'OFF', '5V' or '12V' by pressing < > button.
y
- When select '5V' the 5V is forwarded through the port. when select '12V' the 12V is forwarded
through the port.
10 DTV Channel Update (* Only for LX5**H series)
y It is a mode to set whether to update dtv channel automatically or not.
y
When DTV Channel Update is set to 'Auto', the function to update TV's programme map according
to dtv programme's stream information.
DTV Channel Update is set to 'Manual', the function to keep TV's programme map even though dtv
programme's information is changed.
11 Scart Out (* Only for LX5**H series)
y The monitor out signals can or cannot be output through the SCART cable, depending on the
y
setting value of scart out.You can set to Enable or Disable using the < > button. The default value is
Enable.
12 Radio Name Display (* Only for LX5**H series)
y Instead of "Audio Only", the name of a radio channel is displayed on the screen when a radio
y
broadcast is playing.
y Set to Yes(Work) or No(Do Not Work).
y
y If the setting is "Yes", the name of a radio channel is displayed for the radio channel.
y
y If the setting is "No", the text "Audio Only" is displayed for the radio channel.
y
13 Instant On (* Only for LX5**H series)
y off: TV will go standby mode whenever TV is powered off.
y
y Mute Mode: TV will move on WARM mode automatically whenever TV is powered off. Therefor user
y
will feel no booting time.
y Reset Mode: whenever TV is powered off, TV will go standby mode and then move on WARM mode
y
automatically . Therefor user will feel no booting time.
y But Mute Mode & Reset Mode cause more power consumption in power off.
y
RS-232C IN
(CONTROL & SERVICE)
CONFIGURATION SETUP
29