LG LX54 SERIES Installation Manual page 14

14
INSTALLATION MENU
- Programme
Select start channel number if Input source's value is TV. (in case of ATV, it means physical
channel number.)
- A/V Setting
If 'A/V Setting' is changed from 'No' to 'Yes', parameters that are set before entering 'Installation
Menu' are applied whenever turn on power.
y Following Parameters are applied to basic.
y
» Picture section - PSM mode, Picture Data (Contrast, Brightness, Color, Sharpness, Tint)
» Sound section - SSM mode, Sound Data (Balance, Equalizer Data)
» AVL (Auto Volume Level) and Language, Teletext language, ARC Data. Except these, other
parameters are applied differently according to the TV-Set.
- Aspect Ratio
The aspect ratio determines the default aspect ratio that the set returns to on power up.
y The modes are as follows:
y
» Aspect ratio = "Disabled(0)" stays at previous state, same as consumer model.
» Aspect ratio = "Original(1)"
» Aspect ratio = "4:3 ratio (2)"
» Aspect ratio = "16:9 ratio (3)"
y If enabled, upon power up the television reset the aspect ratio to the specified state regardless
y
of how the user has previously changed the aspect ratio.
(if "original" is not supported, the television set the aspect ratio to "16:9".)
9 Aux Source Setting
The Auxiliary (Input) Source Setting feature will enable or disable for each external input. When 'Aux
Source Setting' is set to Yes(Work), the RJP or HDMI-CEC / HTNG will not operate.
- Input Source
y Available Input Source List
y
- Setting
y Decide whether selected 'Input Source' is usable (Enable) or not (Disable).
y
y User cannot disable the current input's 'Aux Source Setting'.
y
10 Radio Name Display
Instead of 'Audio Only', the name of a radio channel is displayed on the screen when a radio broadcast
is playing.
y Set to Yes(Work) or No(Do Not Work).
y
y If the setting is 'Yes', the name of a radio channel is displayed for the radio channel.
y