Teletext Language Setting; Displaying Subpages; Time Display - Sharp Aquos LC-46LE700X Operation Manual

Teletext function

Teletext language setting

If Teletext information does not display correctly,
perform the procedure below.
Select from among 4 kinds of language tables: West
Europe, East Europe, Greek/Turkish, Cyrillic.
Each table is compatible with the Teletext languages
listed below.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Text language", and
3
then press ENTER.
Press a / b to select receivable teletext
4
broadcasting language in your country.
[ Setup ... Text language ]
MENU
Teletext language settings
• West Europe – English, French, Scandinavian,
Czech, German, Spanish, Italian
• East Europe – Polish, French, Scandinavian,
Czech, German, Slovenian/Croatian, Italian,
Rumanian
• Greek/Turkish – English, French, Scandinavian,
Turkish, German, Spanish, Italian, Greek
• Cyrillic – English, Russian, Estonian, Czech,
German, Spanish, Ukrainian, Lettish
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
West Europe
East Europe
Greek/Turkish
Cyrillic

Displaying Subpages

You can display subpages as they are transmitted.
Press m to display Teletext.
1
Press 1 to display the subpage as shown
2
below.
Subpage screen
– +
Select the desired subpage by using CH r /
3
CH s , Red or Green.
• 0 – 9 directly selects the desired subpage.
Press 1 to exit the subpage screen.
4

Time display

You can display the time information included in the
Teletext broadcast.
Select a TV channel providing Teletext
1
information.
(The time information is automatically
captured.)
Press DISPLAY. The channel display will
2
appear on the display.
Press DISPLAY again. The channel display
3
about three seconds on the screen. Time
information will continuously display on the
lower right of the screen.
Even when you change the TV channel, you
4
can display the time information with steps 2
to 3 above.
NOTE
• The time display cannot be stored once the power is turned
off. When you turn on the power, perform steps 1 to 4 again.
• If acquired successfully the time information will appear in
the upper-right corner of the screen by pressing MENU.
61