Connecting A Pc; Hdmi Connection; Analogue Connection - Sharp Aquos LC-46LE700X Operation Manual

Connecting a PC

Use the PC terminals to connect a PC.

HDMI Connection

PC
3.5 mm stereo minijack cable
(commercially available)
PC
* When using the INPUT 1 terminal, you must select the proper item in the "PC audio select" menu depending on the type of
HDMI cable connected. (See page 56.)
NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 59 for a list of PC signals compatible with the TV.

Analogue Connection

3.5 mm stereo minijack cable
(commercially available)
RGB cable (commercially available)
PC
(commercially available)
PC
* When using the INPUT 7 terminal, you must select "INPUT7(RGB)" in the "PC audio select" menu. (See page 56.)
Signal names for 15-pin mini D-sub connector
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
HDMI cable (commercially available)
DVI/HDMI conversion cable
(commercially available)
3.5 mm stereo minijack cable
RGB/DVI conversion cable
(commercially available)
Pin No.
Not connected
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No. 5 is not used for inputting the signal.
INPUT 2 or INPUT 3
INPUT 1*
INPUT 7*
INPUT 7*
Signal name Pin No.
R
G
B
CSYNC
Signal name Pin No.
GND (Ground)
GND (Ground)
GND (Ground)
+5V
GND (Ground)
Signal name
Not connected
SDA
HD
VD
SCL
55