Advertisement
Start Installation
1. Hardware Installation
Open the package.
1)
Mount the antenna.
2)
back of the camera, screw the antenna into the port, and make the antenna stand vertically.
Figure 1.1 - Mount the antenna
3) Get the camera connected to the router, and insert the power adapter.
Use the network cable to connect the camera to the router or the switch in the LAN network at your
home or your office. Plug in the power. The small green light on RJ45 will turn on.
2. Software Installation
Insert the CD into the CD drive of your computer and find the folder"FI9802W", then go to the folder
"For Windows OS". Copy the IP camera tool to your computer and start the program.
www.foscam.com
Take the camera out of the box carefully.
Then take the Wi-Fi antenna, mount it on the SMA connector on the
Figure 1.3 – IP Camera Tool icon
FI9802W Quick Installation Guide
Figure 1.2 – Plug in the network cable
- 2 -
Advertisement
