Connecting To A Pc - Panasonic HC-V160 Operating Instructions Manual

With a PC

Connecting to a PC

≥ Connect this unit to the PC after the software applications are installed.
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
≥ When the USB cable is connected to other equipment, the AC adaptor cannot be used. Please
ensure that the battery is sufficiently charged.
≥ Turn on the unit.
Connect this unit to a PC.
≥ The Smart wizard screen is automatically displayed when HD Writer LE 3.0 is installed.
≥ This unit is automatically recognised as an external drive of the PC.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor button
to turn the LCD monitor on.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥ When this unit is connected to a PC using a USB cable while the unit is turned on, power is also
supplied from the PC to this unit.
≥ When performing reading/writing between a PC and an SD card, be aware that some SD card
slots built into PCs and some SD card readers are not compatible with the SDHC Memory Card or
SDXC Memory Card.
≥ When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html

- 81 -
(l 83)