Table of Contents
Advertisement
Caution: Please lock casters during installation process
STEP 1: Remove side panel legs (L+R), 2 rubber casters with brake and 2 plastic
wheels from carton. Remove hardware attached to panel legs to secure 2 plastic
wheels with 1/4"hex nuts & 1/4"washers. Then screw in regular casters with brake on
opposite panel legs as shown in figure below.
STEP 2: Attach bottom panel to side panel legs with 8 pieces crossed round
head screws (1/4" x 40 mm) and 1/4" washers to secure bottom panel and side
panel legs.
4
7
Advertisement
Table of Contents
