VTech VSP726 User Manual page 28

Using the Phone
Making a conference call (continued)
When you have an active call and a held call, you can also create a conference
with the held call.
To create a conference with a held call:
1. While on a call with another call on hold, press
2. The active call is automatically put on hold, and the Conf. with target screen
appears, showing the held calls and a "new call" option. Selecting A new call
displays the conference setup screen shown in the previous procedure.
3. On the Conf. with target screen, select the desired held call, and then press
. You are immediately placed into a conference with your first call
Select
and the selected held call.
To end a conference call:
Press one of the following soft keys:
• , which hangs up on both calls.
End
• , which puts both calls on hold. The screen shows information for the
Split
second call.
• , which joins both calls and returns your phone to idle mode.
Bridge
Setting up a Network Conference:
A Network Conference is hosted by your service provider and allows multiple
parties to join a conference. A Network Conference works in a similar way to
the regular conference described above, except that the
functions are not available.
In addition, the soft keys
conference, allowing you to add more parties to the ongoing conference call.
Add and/or AddCall
28
Conf .
and
Split
will appear during a
Bridge