Berner ALC08 Series Installation & Maintenance Instructions Manual page 11

Table of Contents

Advertisement

STEP ONE
STEP TWO
5 Standard Mode of Operation Options:
OFF
ON
AUTO
delu
PLUS
For heated units only
3 Customizable Mode of Operation Options:
See
www.berner.com/intelliswitch
(Section 5, Program Menu).
STEP THREE
To Start: Press the Down Arrow button once.
NOTE: To change from "Mode" to "Fan Speed" press the down arrow twice.
Use the Left and Right Arrows to scroll through the 8 available modes of operations
Door opens: The air curtain is off
Door shuts: The air curtain is off
Door opens: The air curtain activates
Door shuts: The air curtain continues to run
Door opens: The air curtain activates
Door shuts: The air curtain turns off
Door opens: The air curtain activates
Door shuts: The air curtain continues to run for a minimum of 60 seconds
Door opens: The air curtain and heater activate and run at set speed
Door shuts: The air curtain continues to run for a minimum of 60 seconds. If thermostat
is not satisfied, air curtain and heater continue to run until thermostat is satisfied. If
thermostat drops below set temperature, the heater and air curtain will run until
thermostat is satisfied.
for programming directions
Once the Mode of Operation is selected, press the"OK" button
Berner International
www.berner.com
111 Progress Ave. / New Castle / PA / 16101 / USA
800.245.4455
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents